Opel / Vauxhall Corsa E – HiFonics Tweeter Adapter Rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 3D-printed adapter rings to install HiFonics tweeters into the factory Door of a Opel Corsa E
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
HiFonics Tweeter Adapter Rings for Opel / Vauxhall Corsa E
Custom adapter rings designed to fit HiFonics tweeters into the factory tweeter locations (Doorpannel) of the Opel/Vauxhall Corsa E (2017).
Note on Sizing: HiFonics tweeter housings can vary slightly depending on the specific series (e.g., Vulcan, Zeus). Please verify your tweeter's outer diameter before printing, or scale the model slightly if necessary to fit your specific model.
Features:
Direct fit for OEM mounting spots.
Designed specifically for HiFonics tweeter housings.
Clean installation without damaging the car's interior.
Print Settings:
Material: PETG, ABS, or ASA recommended (do not use PLA due to high summer temperatures inside the car).
Infill: 20% – 30%
Layer Height: 0.2 mm
Supports: Minimal supports depending on print orientation.
Compatible Tweeters (Examples)
Optimized for common HiFonics tweeter housings (typically featuring ~25 mm / 1" soft dome diaphragms):
HiFonics Vulcan Series: e.g., VX 6.2T
HiFonics Zeus Series: e.g., ZXR 6.2T / ZXR 1.2T
HiFonics Component Systems: Fits various 2-way system tweeters from the Atlas, Mercury, or Brutus series.
Fitment Tip: Push the tweeter firmly into the printed ring. It should snap into place snugly and sit flush without rattling.