Liczymy pasujące modele…
You need to print two as they fit back to back, to make it easier to install and remove I wet sanded the back half to remove any layer lines which could cause them to lock up. Lock the camshaft drive belt pulleys together when removing…
I ran into some snow in winter and lost the right cover of my headlamp washer. There seem to be two versions of washer covers out there and when I ordered a replacement, I always got the wrong one. 3D printing to the rescue... It was…
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
After some Years, my OPC Key Buttons went away. To save the Key, i've desigend a new Inlay. Printed in TPU - works greate ! No clue needed ! DualColor MMU printable Print instructions I've printed the part on the textured Prusa Sheet to…
Opel/Vauxhall Astra G Keychains. Hatchback,Cabrio,Van,Caravan(wagon) and Coupe design.
A teenager stole GSI 16V logos from my wife's Astra mk3, needed replacement fast…. Color change at, 2,00mm , and 3,00mm. First version, I hope upgrade this model, I know it has some errors, but its functional and…. free ! EDIT: added…
Summary Opel (Vauxhall) Corsa B - Sun visor hook. Because all corsa have broken visor hook :D Instructions just printed in lulzbot AO-100 (mendelMax) without support with 0.4 layer height. Worked without any adjustments
Opel/Vauxhall OPC Logo keychain
Includes STLs for both left and right. They screw into the parcel shelf and mine have worked as intended since 2022. Print in PETG preferably to put up with the car getting hot.
Speaker adapter for fitting aftermaket speakers in front doors. Also should fit Astra F, Astra G, Calibra. If I missed any, feel free to message me or comment below and I'll gladly update my description. Best print this in PETG, ASA or…
original files from: https://www.thingiverse.com/thing:3114789/files I successfully split the original USB connection from the car to 2 USB sockets with these components →…
Opel.Vauxhall corsa+combo engine bar holder
Lost one cover for the B-Pillar Stopper Plug Cover on my Opel Corsa. Printed with no supports with PETG on 0.2 Layer height.
This is a model for GM/Opel/Vauxhall flex organizer hook. Best printed from hard TPU. Or use PETG/ASA/ABS 25% infill should be enough
As in Summary. It’s silhouette pack of: Astra G hatchback 3 door Astra G hatchback 5 door Astra G sedan Astra G combi Astra G panel van in 2 “heights” (it‘s technically width). 1,2mm great for wall 15mm stands by itself routhly 15cm I’m…
Ein Ersatzteil für den Gewindetrieb eines Spiegelstellmotor des Opel Astra H (Corsa D). Für den Druck sollte ein SLA Drucker verwendet werden. Da die einzelnen Segmente das Gewindetriebs im Überlastfall überspringen können müssen, wurde…
Bonnet Stay Clip Arm Rod Prop For Vauxhall Opel Combo Corsa C Meriva A Tigra
Ersatzhebel für Deckel der Mittelarmlehne eines Zafira B oder Astra H Material sollte PETG oder ABS verwendet weren PLA nur bedingt (funktioniert aber bei mir schon einige Zeit mit PLA) Support nicht notwendig (maximal unter dem…
I did not had a remover, so I have looked up the size of the original remover, and designed one for print. You should consider printing this from a stronger material, at least PETG, or ABS/ASA/PA. PLA is too brittle and will break. Tested…
It's a Opel/Vauxhall Astra G OPC Keychain from side view.
I created a model for this timing tool based on a metal one that I got from Amazon. It fits correctly as the metal one; you'll also need 2 M6 screws to lock it into position. Please let me know if it was useful. Thanks
sun visor clip for Opel corsa A or TR / vauxhall nova I drew this quickly because mine broke because of the sun. print on petg 50 infill tree support The orientation of the model should be as shown in the photo so that the clip becomes…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
Printed in PETG Infill, you may use 12% gyroid up to solid part
These are replacement clips for the parcel shelf strap on a Vauxhall/Opel Corsa D. There's the upper clip (the part that attaches to the hatchback boot lid) and a matching lower clip (the part that attaches onto the parcel shelf). These…
The original file "Opel Vauxhall Zafira B Astra H Armlehne / Armrest by jogiarea" looks 100% like my broken off original 2010 Zafira armrest clip. That is very impressive, as it is a quite 3-dimensional design! Unfortunately, when I…
A MagSafe Dock for the new iPhone 12 devices designed for the Opel/Vauxhall Astra G. The dock replaces one of the vents in the center console (if flipped, you could probably also replace the vent left of the steering wheel). The MagSafe…
This custom-designed 3D printed floor mat clip is made specifically for Opel Astra J models. It fits perfectly into the original mounting point and securely holds the floor mat in place. 3D printed clip for Opel Astra J. Fits the original…
Opel/Vauxhall OPC Logo keychain
Keyring design of the older vauxhall logo UPDATED 17/6/2017 Reduced height of logo on keyring Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Supports: No Resolution: 0.15mm Infill: 20% Category: 3D Printing
I made this socket for adding a voltmeter and USB charger for my Corsa C. It snaps into place. The voltmeter is one of those chinese ones that also includes 2 fast charging usb sockets and I just connected it in paralell with the lighter.…
The Vauxhall Type D was an upper-class car produced by Vauxhall Motors from 1912 to 1915 and again from 1921 to 1922 as the Vauxhall 25. More than 1,500 were delivered to the British Army as command staff or ambulance transport vehicles…
A replacement parcel shelf clip for a Vauxhall Mokka This is based on a clip from a 2015 car but may suit other years and models Printed with four outer shells and 100% infill Supports will probably be required as some parts are suspended…
Ash Tray Insert for Opel Astra H. I wanted to monitor the battery voltage and Coolant temperature in my Opel Astra H, so i designed this model to replace the Ash Tray with a nice little Screen to show me this information. I used this…
Just a Label Print for your car modding to apply anywhere. Print it with : PETG/PAL 10% Infill 0,2 Layer Height. Use Cura to scale it to your wanted Size.
Opel/Vauxhall Astra G Sedan keychain from side view.
This is a Phone Holder for Opel/Vauxhall Astra it has been tested and fitted on the K series 2016 model.
A work in progress modular mounting system for Opel (Vauxhall) Astra H. This mounting system features modular design, so you can create your own things that you want to mount - cupholders, phone holders and so on. In my case I wanted a…
As i drive as much as possible with the cruise control the rubber wheel is worn down after nearly 14 years and it was hard to adjust the speed with it. To change the whole expensive switch assembly you had to remove the airbag - so that…
This is a Opel/Vauxhall Astra G OPC keychain from front view. Good for people who love this car.
This is a cupholder specifically for the Vauxhall (Opel) Grandland 2022 Automatic. It may or may not fit other models. The default cup holder is smaller, this design can hold two large McDonald's cups without them tipping, it can also…
Made this trim panel based on the original cigarette lighter panel fittings, in order to accommodate an extra USB socket. There is two files so you can choose in which side it will be the USB socket/cig lighter. Make sure to use a…
My old sunvisor clips broke due to age so i made some new. Would recommend printing it in something quite heat resistant.
Will probably also fit the Opel Corsa, but I haven't tested it. Recommended to print with no supports, at an angle, as shown in the included gcode file. Matches part number 13240696
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
Found out there are many holders for this specific car, but none of them were actually fitting perfectly or solving my issues. I decided to measure the car, make a 3D scan of the hole and create perfectly fitted phone holder. And - here I…
vauxhall nova saloon or opel corsa A radio cover to cover the radio hole can be edited to add buttons or something
The original Powerflex phone holder is not suitable for holding phones in thick cases like mine. This modification utilizes the back of the original Powerflex holder (Opel part number 13471402) and adds a new front. The front is printed…
Original Powerflex phone holder is unusable for holding phones in thick cases like mine. This modification uses back of original Powerflex holder (Opel part nr 13471402) and adds new front. Front printed from PETG. Front consist of two…
I made this to hold my 2016 Vauxhall Astra keyfob because both of my keys keyring holder had snapped off, it probably fits other makes/models being GM. It's bulky but a much cheaper option than buying a new key fob. You need to really…
Fitting 5.25 speakers to my Frontera but the mounting holes don't line up so I knocked this up for an adapter. Printed mine in PETG should be fine hidden down in the door temp wise. Printed with 5 walls, top and bottom with 25% infill and…
OEM spare part for Zafira B rear foldable seats' handle clip. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Devil Design PLA Yellow Notes: Print with supports from bed only. 0.5 nozzle maximum. Category:…
Redesigned the end cap to have vauxhall badge instead of the VW Print with supports
This modell is a screw in place visor hook for a Opel Zafira C Tourer. Use PETG, Nylon, PCTG, CPE or other HT filaments
A cover for a trunk lock mechanism that is hidden in a trunk floor. Middle one in the photo is the original part with a number GM 0519114 24469264 written on the back. The top one is a version without a pattern, bottom is the version with…
Vauxhall rotable key ring 🚗 How work https://vm.tiktok.com/ZNRm8yGvx/
This phone holder is made for Vauxhall/Opel Astra K and combines holding your phone and charging it. For the Record this was designed for 2016 model. But it should fit most. You can buy a wireless charging module from ebay.…
My load cover on my car lost one of the ends that clips into the brackets so I designed one. Print this horizontally for the best strength. I recommend using ABS if possible Print Settings Rafts: Yes Supports: Yes Resolution: 0.2 Infill:…
12V car socket cover for Vauxhall Print instructions G code with filament change for colour change on the Vauxhall logo
KM-6340 Camshaft Locking Tool for Opel / Vauxhall / Chevrolet (Z16XER, Z18XER) Camshaft locking tool for Opel/Vauxhall Astra H 1.6 - 1.8 . This tool is also compatible with some other Opel/Vauxhall models and brands (Chevrolet, Fiat…
vauxhall nova saloon or Opel corsa A TR Can be used as a keychain or something like that
Its a extra cupholder for the automatic Astra. it fits 2x 250ml and a small storage fot a garage door
Rear trunk hook vor Opel / Vauxhall Vectra C. Print from PETG or ABS. Category: Automotive
Replacement air vent fins for the Opel/Vauxhall Corsa D , designed from measurements of the original parts. The set includes 2 different fin lengths as well as the centre fin with the thicker finger grip/holder and the central fins…
CCS cover for lower port with a hole for the rubber strap fitted to Stellantis (and Toyota) EV vans. Printed with hollow side down and tree supports. Mine's in PLA - it's behind a vehicle flap so isn't weathered. Rubber strap end is a…
Key Tag Vauxhall A custom tag for use with my Key Organizer. https://www.printables.com/model/311330-key-organizer It replaces the standard key tag available for use with the “Key Tag Rack”. I’ve created a range of tags to cover Car…
I needed a clothes hanger for my Opel Combo service van, and spotted some rectangular square slots in the sides in the cargo room and thought “this will be perfect!”. I hopped into OnShape, and this is the result; simple, sturdy and low…
A friend is restoring a 1980's MK1 Vauxhall Nova and was having trouble finding clips for the headlights. After searching all the usual Sites I had no success finding any. Fortunately I work with some very talented people and had one of…
Opel / Vauxhall Astra H Door Check Repair Sliders (Stops) This model is a replacement part for the worn-out plastic sliders (shoes) inside the door check mechanism of the Opel / Vauxhall Astra H. If your car door fails to hold open at the…
This is a remix of Boergy’s Opel Adam keycap, redesigned to feature a more prominent and clearly defined Lock and Unlock symbol. The updated design improves visibility and gives the keycap a sharper, more distinctive look while…
I rotated the cable holder for vertical fan outlets. Edit 21-6-2019: My Open/Vauxhall Astra Sports Tourer has a bit "special" designed fan duct, so I created a USB cable holder specific for this car. Since the "hook" on the cable holder…
Needed to access components under the trunk interior cover, but the fragile factory clips snap quite often upon removal. They are not designed 1:1 to the original part but they work the same as the original ones. Replacement for following…
If you’ve lost one of the plastic pins that secure your Opel/Vauxhall Signum’s cargo cover, you know how frustrating it can be to lose trunk privacy. I faced the same issue after a trip to the car wash and decided to solve it by designing…
Fits: Opel/Vauxhall Meriva B highbeam with Bevinsee F31B I have made this model make fit my high beam H1 LED into the headlight's housing. The original H1 halogen uses a plastic mount from the back with three rails and a clip, which did…
OEM Zafira B (Opel/Vauxhall) Rear seats desk shelf holder. This part allow o keep the desk shelf both in un and down position. The metal spring apply a huge force into it. Print Settings Printer: HE3D Tarantula Rafts: No Supports: Yes…
This is a replacement rubber bumper from the rtear window of the 2024 Vauxhall Combo Life. It is best printed in TPU
Designed to protect the Mokka keys from opening all of your windows while you're not looking. My dad kept noticing he would go and look at the car only to see that all of the windows had opened. This was because he accidentally pressed…
Vauxhall/Opel Zafira C silhouette
This lever is designed to mount to the pull cord for the hood/bonnet release in Corsa E and similar models. I printed in PETG with 100% wall thickness and a brim for adhesion. For strength purposes I'd print as hot as possible, especially…
Printed it with Fiberlogy Mattflex 40D. The thickness of the ring is changing, so it better follows the geometry of the car body. Thinner close to the hinge, thicker towards the locking mechanism. Check the correct orientation before…
Stencil to align the crankshaft when doing the timing belt. Amazon tools accuracy was awful so I did my own.
I was not able to find a handle at reasonable price so i desided to model one myself, it doesnt perfectly match it as you can see in the pictures, the interior fabric holes shows, screw holes matches perfectly though. Its still work in…
This 3D printable clip is a functional, cost-effective replacement part for the OEM rear parcel shelf clip on the Opel / Vauxhall Astra H Caravan , which is prone to snapping over time. Recommended Print Settings: Material: PETG , ABS ,…
Replacement handbrake cover for Opel Tigra. Perfect solution if your original part is broken or worn out. Little clips are more sturdy when printed horizontally Recommended Print Settings: Material: PETG Walls: 3 Supports: Yes
My dads remotes were worn down and the locking buttons where completely gone. So i drew some button caps and printed them out. Fits perfectly. Also made a version with a little padlock on it.
HiFonics Tweeter Adapter Rings for Opel / Vauxhall Corsa E Custom adapter rings designed to fit HiFonics tweeters into the factory tweeter locations (Doorpannel) of the Opel/Vauxhall Corsa E (2017). Note on Sizing: HiFonics tweeter…
Print suggestions: print with the spring facing upwards use supports on the bed only to avoid having to scrape underneath the latch print with the lowest possible layer height; this helps mitigate snagging during install Tested using…
I removed the split compartment in the front and the hole for the USB cable. I have my wifi dongle for the Android car in the arm rest, hence my USB is used anyways and I don't need to feed the cable through and I have the option of…
A work in progress modular mounting system for Opel (Vauxhall) Astra H. This mounting system features modular design, so you can create your own things that you want to mount - cupholders, phone holders and so on. In my case I wanted a…
Stencil to align the crankshaft when doing the timing belt. Amazon tools accuracy was awful so I did my own.
Vauxhall rotable key ring 🚗 How work https://vm.tiktok.com/ZNRm8yGvx/
I made this to hold my 2016 Vauxhall Astra keyfob because both of my keys keyring holder had snapped off, it probably fits other makes/models being GM. It's bulky but a much cheaper option than buying a new key fob. You need to really…
