1 / 2
Fuel Tank Door Clip for Suzuki Ignis, Wagon R+ and Opel (Vauxhall) Agila (PETG) — zdjęcie 1
1 / 2

Fuel Tank Door Clip for Suzuki Ignis, Wagon R+ and Opel (Vauxhall) Agila (PETG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of the replacement for the fuel tank door latch. Modified for easier install

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
9
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

Print suggestions: 

  • print with the spring facing upwards

  • use supports on the bed only to avoid having to scrape underneath the latch

  • print with the lowest possible layer height; this helps mitigate snagging during install

  • Tested using generic PETG

Install:

  1. Remove old latch: use flathead screwdriver or prying bar to pry the old latch out

  2. Put the foam pad from the old latch on the new latch (if you are missing the pad, you could print one from TPU; I think it's 2mm thick but I didn't measure it while it was apart)

  3. Firmly push the new latch in. Take care not apply force directly on the latch mechanism to avoid breaking it.

Tagi