Fuel Tank Door Clip for Suzuki Ignis, Wagon R+ and Opel (Vauxhall) Agila (PETG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the replacement for the fuel tank door latch. Modified for easier install
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Print suggestions:
print with the spring facing upwards
use supports on the bed only to avoid having to scrape underneath the latch
print with the lowest possible layer height; this helps mitigate snagging during install
Tested using generic PETG
Install:
Remove old latch: use flathead screwdriver or prying bar to pry the old latch out
Put the foam pad from the old latch on the new latch (if you are missing the pad, you could print one from TPU; I think it's 2mm thick but I didn't measure it while it was apart)
Firmly push the new latch in. Take care not apply force directly on the latch mechanism to avoid breaking it.