Parametric Under-Desk Power Strip Mount / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable under-desk power strip brackets with adjustable width, height and socket clearance.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed these mounting brackets to securely attach a power strip underneath my desk, keeping it off the floor and out of the way.
There are already plenty of power strip mounts available, but I couldn't find one that worked well for me. The adjustable designs I tried were too flimsy, while the sturdier ones had fixed dimensions that didn't fit my power strips.
So I designed my own: a sturdy, fully parametric mounting bracket that can be adjusted to fit different power strips without compromising on a solid, simple design.
The brackets wrap around the ends of the power strip and can be screwed directly into the underside of a desk or tabletop.
The semicircular cutouts provide clearance around the power sockets, allowing plugs to be inserted without interference from the brackets.
I've included the original Fusion 360 (.f3d) file alongside the ready-to-print models.
Parameters
You can customize the following parameters in Fusion 360:
width: Controls the width of the bracket.height: Controls the height of the bracket.inset: Controls how far the semicircular socket cutout extends into the bracket.
Ready-to-print dimensions
The included ready-to-print files use the following values:
Width: 40 mm
Height: 30 mm
Inset: 5 mm
These dimensions fit (one of) my particular power strip(s). Make sure to check the measurements of yours before printing.
Installation
Print two brackets, one for each end of the power strip, and attach them underneath your desk using suitable screws.
Make sure the brackets hold the power strip securely without obstructing the sockets, power switch or power cable.
Print settings
Material: PLA or PETG (I did simple PLA)
Supports: No
Quantity: 2
The included Fusion 360 source file allows you to customize the dimensions without having to remodel the brackets from scratch.