P3 Thermal Camera Workbench Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thermal Master P3 Adjustable Stand with Tablet Holder and Focus Ring
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I designed this 3D-printable stand for the Thermal Master P3 thermal camera to use during electronics testing and PCB inspection.
The setup holds a Galaxy Tab for viewing the thermal image, allows the camera height to be adjusted, and includes an enlarged focus ring to make manual focusing easier.
Features
Height adjustment for positioning the camera above the work area
Galaxy Tab cradle for viewing the camera feed
Enlarged focus ring for easier manual focus adjustment
Designed for close-up observation of PCBs and small electronic components
Why I Made It
I wanted to put a Galaxy Tab that I rarely used back to work as a display for thermal inspection. This stand lets me position the P3 over a PCB and adjust its height and focus while observing heat distribution.
This is the stand shown in my Thermal Master P3 review on the DS1UMG | Engineering Lab YouTube channel.
Compatibility and Printing
The design was made for my Thermal Master P3 and Galaxy Tab setup. Check the model dimensions against your tablet, camera, and connector arrangement before printing.
Choose print orientation, supports, and settings to suit the geometry of each part and your printer.
If you print this model, feel free to share a Make and let me know how it works in your setup!