Modular LEGO F1 Track – 50 mm Straight Barrier
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50 mm straight barrier for a modular LEGO F1 track with interchangeable straights and curves.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
his 50 mm straight barrier is part of my modular track project designed for standard LEGO F1 cars.
The goal is to build a customizable circuit using small 3D-printed modules that can be connected in different configurations.
The complete project includes:
50 mm and 90 mm straight barriers
Three curve sizes: V1, V2 and V3
Left-hand and right-hand curves
Modular connectors
A pit lane with four parking spaces planned for a future version
The modular design makes it possible to create different track layouts without printing an entire track surface.
Recommended print settings: 10% infill and supports enabled.
This is an independent fan-made project and is not an official LEGO product.