1 / 8
Sleepy Fidget Goat That Wiggles in Your Hand — zdjęcie 1
1 / 8

Sleepy Fidget Goat That Wiggles in Your Hand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fidget goat that prints in place with no supports, AMS and single colour profiles and a wiggly segmented body.

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Animals
Licencja
Standard Digital File License

This fidget goat prints in place as one piece, with a segmented body that bends and wiggles as soon as it comes off the plate. He's a chunky little character with tan curved horns and sleepy closed eyes, so he looks just as good sat on a shelf as he does in your hand. He makes a lovely desk fidget for anyone who likes something to fiddle with on long calls, and a fun gift for a grown up animal lover.

There are two print profiles, one for AMS and one for single colour, so he works whether you've got a multicolour setup or just one spool loaded. No supports are needed, so it's a nice easy one if you're new to print in place. This print uses 0.6mm line widths for the default, initial and outer walls, so keep those and stick with 2 or more wall lines. Once he's off the bed, give each segment a gentle flex to loosen everything up.

Filament Colour & Material

Print this one in PLA. White with tan horns looks great on the AMS profile, or try a single bold colour like red on the single colour profile.

Print Settings

  • Print in place

  • Supports: No

  • Wall line count: 2 or more

  • Infill: 15%

  • Nozzle: 0.4mm

  • Layer height: 0.16mm

  • Line width: 0.6mm for default, initial and outer walls

Feel free to print this one for yourself or as a gift. If you want to sell prints or use it commercially, you'll need the Commercial Licence tier over on Patreon:

https://www.patreon.com/c/FolkandForge

Tagi