Easy Power Switch for Logitech MX Mechanical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy-grip cap for the MX Mechanical’s fiddly power switch. Under 2 g, no supports, with a cutout for the status LED.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
The power switch on the Logitech MX Mechanical is tiny and tucked away at the edge of the keyboard, which makes it surprisingly fiddly to flip, especially for anyone with limited finger dexterity, reduced grip strength or larger hands. This little cap fits right over the switch and turns it into a large, easy-to-grab lever, so you can switch your keyboard on and off without fumbling around with your fingernails.
It’s incredibly easy to print: it needs less than 2 g of filament, no supports and no special nozzle, and the tolerances are designed to work on practically any printer. It’s also completely non-destructive, so no modifications to the keyboard are required. It even features a cutout for the keyboard’s indicator light, so you can still see the status at a glance. If that light bothers you anyway, there’s a second version that covers it completely. All tolerances have been tested on a real Logitech MX Mechanical.
My print settings
PLA
0.2 mm layer height
no supports
Print in the same orientation as shown in the picture