Gridfinity Set – fits IKEA HELMER Drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity baseplate and bins sized to the published inside of the HELMER drawer (220 x 370 mm).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Gridfinity baseplate and bins for the HELMER steel drawer unit, sized to the smaller of IKEA's two published inside sizes (220 × 370 mm), so it fits both.
Dimensions used (manufacturer-published inner sizes):
IKEA product page (HELMER 706.250.23): inside width 22 cm, inside depth 37 cm: https://www.ikea.com/qa/en/p/helmer-drawer-unit-on-castors-black-70625023/
IKEA customer service (FR): inside 23.3 × 37.2 × 8.7 cm (height used for bins): https://www.ikea.com/fr/fr/customer-service/knowledge/articles/ddfdg877-b2ec-4bb6-99db-bf9bef53724c.html
How it works: plain Gridfinity baseplate tiles (lightweight, open-bottom, 42 mm standard) butt together, and plain spacer strips fill the gap to the walls, so nothing slides. No glue and no snap clips. Every part fits a 256 × 256 mm bed. Print the fit-test corner first.
Estimated print time and filament (Bambu Studio slicer estimate, A1, PLA, 0.2 mm, 15% infill, 3 walls, no supports):
HELMER drawer (inside 220 × 370 mm used): about 5h01m and 222 g PLA in total
⚠ Honest note: the images are renders. Designed from the published dimensions and not print-tested yet (my printer hasn't arrived). Please print the fit-test corner first. 🙏 If you print it, please post a Make and comment on the fit (tight / loose / perfect, and by how many mm). I'll update the files.
IKEA publishes two inside sizes (22 × 37 cm and 23.3 × 37.2 cm). This set uses the smaller one. In a 23.3 cm drawer there will be about 6–7 mm of extra side play.
Bins: 42 mm and 70 mm tall. Inside height is 87 mm (IKEA FR).
Unofficial accessory, not affiliated with or endorsed by the brand owner. Names describe fit only. STL + STEP included. Licence CC BY-NC-ND 4.0. Designed by Southern Cross Shed, Perth, Australia.
Parts per set
HELMER drawer (inside 220 × 370 mm used)
Inner size used: 220 × 370 mm → footprint 218.0 × 368.0 mm (2 mm total clearance); grid 5 × 8; tiles 2; side strips 4.0 mm, end strips 16.0 mm (omitted if < 3 mm)
drawer220x370_baseplate_5x4.stl × 2
drawer220x370_side-strip_4.0x168.stl × 4
drawer220x370_end-strip-both_16.0x218.stl × 2
drawer220x370_fit-test-corner.stl × 1
drawer220x370_bin_1x1_42mm.stl × 1
drawer220x370_bin_2x1_42mm.stl × 1
drawer220x370_bin_2x2_42mm.stl × 1
drawer220x370_bin_1x1_70mm.stl × 1
drawer220x370_bin_2x1_70mm.stl × 1