Brennenstuhl Premium-Line Power Strip Clip-On-Bracket for wall mount / under desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip-on-bracket for Brennenstuhl Premium-Line n-Way Power Strips. Fits for all single row models. Wall/Desk mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
I wanted to design a flexible holder for Brennenstuhl power strips of various types (n-way).
It should work with any housing from the Brennenstuhl Premium-Line (single row).
Easy mounting and unmounting should be possible, while still providing firm hold.
The mounting brackets should not interfere with plugs or switches on the front side of the outlet.
Main features of the design:
- Fixed with 4.0 or 4.5mm countersunk screw of suitable length
- strong version with higher retention force / stronger plugging forces
- screws hidden by power strip
- suitable for horizontal and vertical power strop mounting
model file: BrennenstuhlPremiumLineHolderWall_v05.stl
The material recommended is PETG, as during usage the holders have to keep the extension lead n-way housing in position and must support the weight of the housing plus cables and power supplies plugged into it..
Printed with SUNLU PETG (Yellow).
[ Wall Mount Brennenstuhl Premium-Line Clip-On-Brackets]
2x Clip-On bracket (strong) = BrennenstuhlPremiumLineHolderWall_v05.stl
For power strips with with large housings, an optional third bracket can enhance stability.
(support: none)
(brim: recommended (depending on sheet: smooth, satin -> no brim / textured -> brim)
(print orientation: side face of bracket down)
(colour: Any colour you like ;-)
Assembly
Two holders are required for each Brennenstuhl Premium-Line Extension Lead n-Way (minimum)
Larger housings might require an additional bracket for a firm fit during use.
The brackets are designed for wall mount.



[Step 1]
Place the brackets at the far ends of your power strip and measure the distance (hole bracket1 - hole bracket2)
The hole-hole distance of the bracket is 33mm.

[Step 2]
Mark the screw positions on the wall and make sure there is enough space to place your power strip at the marked position.
Make sure, that bracket1 and bracket2 are properly aligned.
For a horizontal power strip orientation, you can move the brackets on the housing to fine tue their positions.

For a ver ticalpower strip orientation, you need to position the brackets on far ends of the the housing to make sure the power strip stays in position after clip-on.

[Step 3]
Drill holes if necessary.
(Be sure it is safe to drill at the marked positions)
[Step 4]
Fix the clip-on-brackets on the wall.
Use 4.0 or 4.5mm countersunk screws of suitable length.
Make sure the screws hold firmly.
[Step 5]
Just clip your Brennenstuhl power strip housing onto the fixed brackets .. ready!
