1 / 10
Ultra-Slim CR2032 Emergency Keyfob Case – "Don't Get Locked Out!" — zdjęcie 1
1 / 10

Ultra-Slim CR2032 Emergency Keyfob Case – "Don't Get Locked Out!"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Is your car's remote key battery dead? Don't get stranded! This new ultra-slim and minimalist version is designed to…

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Is your car's remote key battery dead? Don't get stranded! This new ultra-slim and minimalist version is designed to hold a spare CR2032 lithium battery directly on your keychain, without the bulk of screw-thread models.

💡 Looking for the original version with a screw cap?
You can find the threaded capsule model here:


⚙ Minimalist Design & Compact Dimensions:

  • Ultra-Compact Size: Outer diameter of just 22.8 mm and a total thickness of only 6.6 mm!

  • Slide-In & Snap-Lock: Features a sleek side-entry slot. Two internal retention tabs securely lock the battery in place.

  • Fast & Easy Ejection: The top surface features an ergonomic thumb/fingernail groove. Simply push the battery with your finger to slide it out instantly.

  • Ultra-Low Profile: Significantly smaller and thinner than threaded designs. Fits seamlessly alongside your modern car key fob without adding pocket bulk.

  • Visual Confirmation: The open top slot lets you check at a glance that a battery is loaded (and read the CR2032 text).

  • Single-Piece Design: The main body and retention mechanism print as a single piece. No caps to unscrew or lose!


🖨 Recommended Print Settings:

  • Layer Height: 0.12 mm to 0.20 mm (Lower layer height ensures smoother and stronger retention tabs)

  • Wall Loops / Perimeters: 3 or 4 (For maximum structural rigidity)

  • Infill: 100% (Recommended for maximum strength on such a small functional print)

  • Supports: NO SUPPORTS NEEDED!

  • Orientation: Print flat on the build plate.

  • Material: PLA, PETG, or ABS/ASA (PETG or higher recommended for heat resistance inside a hot car during summer).


💬 Support & Feedback

If you like this design, please consider leaving a Like and a Boost, and don't forget to share a photo of your make! Happy printing! 🚀

☕ Personal & Commercial Use Info:

 This digital model is free for personal use only.

If you wish to sell physical 3D prints of this model, an active commercial subscription is required. 

🔗 Get your license & commercial rights here: https://www.patreon.com/cw/Vinors3DLab

Tagi