1 / 10
Ultra-Slim CR2032 Emergency Keyfob Case – "Don't Get Locked Out!" — image 1
1 / 10

Ultra-Slim CR2032 Emergency Keyfob Case – "Don't Get Locked Out!"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Is your car's remote key battery dead? Don't get stranded! This new ultra-slim and minimalist version is designed to…

Rating
0 / 5
Likes
4
Downloads
9
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Is your car's remote key battery dead? Don't get stranded! This new ultra-slim and minimalist version is designed to hold a spare CR2032 lithium battery directly on your keychain, without the bulk of screw-thread models.

💡 Looking for the original version with a screw cap?
You can find the threaded capsule model here:


⚙ Minimalist Design & Compact Dimensions:

  • Ultra-Compact Size: Outer diameter of just 22.8 mm and a total thickness of only 6.6 mm!

  • Slide-In & Snap-Lock: Features a sleek side-entry slot. Two internal retention tabs securely lock the battery in place.

  • Fast & Easy Ejection: The top surface features an ergonomic thumb/fingernail groove. Simply push the battery with your finger to slide it out instantly.

  • Ultra-Low Profile: Significantly smaller and thinner than threaded designs. Fits seamlessly alongside your modern car key fob without adding pocket bulk.

  • Visual Confirmation: The open top slot lets you check at a glance that a battery is loaded (and read the CR2032 text).

  • Single-Piece Design: The main body and retention mechanism print as a single piece. No caps to unscrew or lose!


🖨 Recommended Print Settings:

  • Layer Height: 0.12 mm to 0.20 mm (Lower layer height ensures smoother and stronger retention tabs)

  • Wall Loops / Perimeters: 3 or 4 (For maximum structural rigidity)

  • Infill: 100% (Recommended for maximum strength on such a small functional print)

  • Supports: NO SUPPORTS NEEDED!

  • Orientation: Print flat on the build plate.

  • Material: PLA, PETG, or ABS/ASA (PETG or higher recommended for heat resistance inside a hot car during summer).


💬 Support & Feedback

If you like this design, please consider leaving a Like and a Boost, and don't forget to share a photo of your make! Happy printing! 🚀

☕ Personal & Commercial Use Info:

 This digital model is free for personal use only.

If you wish to sell physical 3D prints of this model, an active commercial subscription is required. 

🔗 Get your license & commercial rights here: https://www.patreon.com/cw/Vinors3DLab

Tags