CHEERS: Bottle Opener Dock for Logitech MX Mechanical
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle opener that clips onto the front edge of the Logitech MX Mechanical, at the space bar. Cheers!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A bottle opener that lives on your keyboard. A small dock clips onto the front edge of the Logitech MX Mechanical, right under the space bar, and holds the opener bar until you need it. The bar has “CHEERS” engraved on top, readable from your seat.
The dock uses the same clip as the paddle bar, so it snaps onto the front lip of the keyboard. The bar lifts straight up and out, with nothing blocking its path. There is a lanyard hole at the end of the handle.
How to use the opener:
Lift the bar out of the dock.
Put the hook under the edge of the cap, with the flat part resting on top of the cap.
Lift the handle end. The far rim of the cap is the pivot.
I checked the lever motion in CAD. The bar never touches the neck of the bottle, and the hook only catches the cap rim.
Print settings :
Dock: lying flat, no supports.
Bar: standing on its long edge, so the layer lines run along the hook. Use 5 or 6 walls and a high infill, ideally 100%. The bar weighs about 13 g.
0.2 mm layers.
This is meant for normal crown caps and occasional use. It is plastic, so it is not for stuck or twist-off caps. STEP files are included for CAD. Not test-printed yet.
