1 / 2
The Landing – Japandi Entryway Organizer Shelf with Key Hooks — zdjęcie 1
1 / 2

The Landing – Japandi Entryway Organizer Shelf with Key Hooks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Japandi wall organizer with a removable tray, mail pocket, four key pegs and concealed mounting.

Ocena
0 / 5
Polubienia
5
Pobrania
10
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

A Japandi-inspired wall organizer featuring a rounded fluted backplate, removable curved tray, rear mail pocket, four rounded key pegs and concealed screw mounts.

Assembled size: approximately 270 × 116 × 168 mm. Includes two STL parts, K2 Plus PETG 3MF project, complete ZIP with editable Python source and mesh checks, and print/assembly instructions.

PRINTING

Suggested PETG, 0.4 mm nozzle, 0.20 mm layers, 5 walls, 6 top/bottom layers and 25–30% gyroid infill. Backplate: rear face down with local supports under rail lips and peg-cap shoulders. Tray: underside down, normally without supports. Configure your printer and filament profiles before slicing.

ASSEMBLY

Concealed rear keyholes are 170 mm apart. Use wall-appropriate screws and anchors. Dry-fit the tray; full mounting dimensions and assembly directions are in PRINT-AND-ASSEMBLY.txt.

Prototype v3: digitally checked meshes; physical prototype remains untested and no load rating is assigned. Intended for light keys, letters, phone and wallet, not bags or coats. Gallery includes CAD and generated-image design comparison previews.

More designs and behind-the-scenes previews: https://www.patreon.com/RCJCreations

Tagi