Dell R7 series Bezel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom bezel designed for thr R7 series Dell rack mount server. This has been cut to fit the length of a…
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 336
- Wydruki
- 1
- Wyświetlenia
- 2444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom bezel designed for thr R7 series Dell rack mount server.
This has been cut to fit the length of a small bed such as the Ender 3
The retention system is still untested but shoud work well enough. Possibly a minor bit of sanding/filing on the front edge to create a dimple to click into.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
PolyMaker PLA
Notes:
print at 0.2mm I would suggest using adaptive layers with a max deviation of 0.8 and a 0.4 step size (0.12 - 0.32 height) for the best finish.
Category: Computer