1 / 5
Norton commando cylinder exhaust port cover — zdjęcie 1
1 / 5

Norton commando cylinder exhaust port cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prevents dirt in the cylinder in case exhaust is removed or while overhauling the engine.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
83
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed for my 1974 Norton commando 850 MK2a.

Should fit on all Commandos 750 and 850. 

Screws on and off by hand. In case it‘s heavy to losen, the handle fits a 1/2“ wrench or there is a hole for a Tommy bar. 

Prints without support. 0,15mm structural.

Remove before starting the engine.

Bear in mind that PETG looses its shape resistance around 65°C to 75°C (149°F to 167°F) if you intend using a heat gun or blowtorch.

See also my Norton commando Tacho drive house cover here.

See also my Norton commando Oil junction block cover here.

Norton commando Camshaft/engine rotater here.

Use at your own risk.
This 3D model is provided "as is" without any warranties. The creator assumes no liability for any damages, injuries, or losses resulting from the printing, assembly, or use of this object.

Tagi