Handlebar Accessory Mounts Compatible with Bontrager Pro Stems
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hi/Low mounts compatible with Bontrager Pro Stems. Versions for CNCKitchen Heat set inserts and hex nuts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 8
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
.3mf files are exported from PrusaSlic3r with settings I use for ABS at 0.2mm layer height. Supports should be set to support from build plate only. Other printers may be able to reduce the supports I include.
There is a thin beam across the two legs of the mounts to prevent them from warping toward each other that need to be removed. A small pair of side snips pops it off easily for me.
For the version that uses CNCKitchen Heat Set Inserts, it uses M5 x 5.8 (short version) inserts.
Fusion 360 files and .step files are included for ease of modification if needed.
Model was reverse engineered by measuring stem, handlebar, and several trial-and-error prints.