Handlebar Accessory Mounts Compatible with Bontrager Pro Stems
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi/Low mounts compatible with Bontrager Pro Stems. Versions for CNCKitchen Heat set inserts and hex nuts.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 8
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
.3mf files are exported from PrusaSlic3r with settings I use for ABS at 0.2mm layer height. Supports should be set to support from build plate only. Other printers may be able to reduce the supports I include.
There is a thin beam across the two legs of the mounts to prevent them from warping toward each other that need to be removed. A small pair of side snips pops it off easily for me.
For the version that uses CNCKitchen Heat Set Inserts, it uses M5 x 5.8 (short version) inserts.
Fusion 360 files and .step files are included for ease of modification if needed.
Model was reverse engineered by measuring stem, handlebar, and several trial-and-error prints.