1 / 3
Wide-Spacing Remix: DCFC + J1772 to NACS Adapter Holder for Rivian R2 (A2Z fit) — zdjęcie 1
1 / 3

Wide-Spacing Remix: DCFC + J1772 to NACS Adapter Holder for Rivian R2 (A2Z fit)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of OpenSourceEV's R2 adapter holder, 25mm wider opening spacing for A2Z adapters. Untested -haven't gotten R2 yet.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1.1

Remix credit

This is a remix of "OpenSourceEV DCFC + J1772 to NACS Adapter Holder for Rivian R2" (OCL v1.1) by Rob @OpenSourceEV: https://www.printables.com/model/1876474-opensourceev-dcfc-j1772-to-nacs-adapter-holder-for

All credit for the original design and concept goes to the original designer. Please check out the original and the rest of his work.

Why this remix exists

The original holder was sized for the Lectron / Rivian OEM adapters. My A2Z adapters are physically larger and didn't fit in the original openings, so I made the holder wider.

Designed around:

- A2Z Thunderstorm CCS1 to NACS adapter: https://a2zev.com/collections/charging-adapters-home-page/products/ccs1-nacs-thunderstorm

- A2Z Atom J1772 to NACS adapter: https://a2zev.com/collections/charging-adapters-home-page/products/j1772-nacs

What changed

- Spacing between the two adapter openings increased by exactly 25 mm (center to center: about 88.7 mm to about 113.7 mm)

- Overall length increased from 150 mm to 175 mm

- Nothing else was changed. Opening size and shape, the slots, wall height and thickness, the U-notches and the end tabs are identical to the original, so the door pocket mounting should be unaffected.

- The wall's recessed pocket pattern was continued through the new section.

UNTESTED

I have not test-fitted it in a Rivian R2 yet. The change is a simple geometric widening, but please treat it as untested until fit is confirmed. I'll update this page once I've checked it an R2. If you print it, I'd love to hear how it goes in the comments.

Printing

Same as the original: ASA, or a good PETG with strong internal fill. You also need two R2 front door pocket hangers, per the original listing (Todd Stansell's "Rivian Cup Holders": https://www.printables.com/model/825942-rivian-cup-holders).

License

Like the original, this remix is released under the Open Community License (OCL) v1.1: https://github.com/OpenCommunityLicence/OpenCommunityLicence

You're free to use, modify and remix it. If you share a derivative, please share it under the OCL too.

Notes

Not affiliated with or endorsed by OpenSourceEV, A2Z EV, Rivian or Tesla. Product names are used only to describe compatibility.

Tagi