Anderson Powerpole Panel Mount Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual and Quad mounting faceplates for 15-amp, 30-amp, and 45-amp Anderson Powerpole connectors
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are sized for standard 15A - 45A Anderson Powerpole connectors.
Two sizes - quad or dual connectors
Two faceplate fastener options - M3 cap/button head or M3 flat head
An (optional) marking/cutting/drilling template is included for each size ("measure twice, cut once")
I printed in PETG, 100% infill. No supports.
Hardware used:
Retaining Pin Options:
3/32" dia roll pins are standard (1/4")
Will not be long enough to trap the connectors in the body
A longer one will work I had 1/2" long ones for the dual connector body
Flat head machine screw, 2.5mm x .... 12-14mm for Dual; 18-20mm for quad
Threads into the body, self-tapping
You can always shear off longer screws with a pair of Klein's
Toothpicks or QTip also work
Mounting Faceplate hardware
(2) M3 screws - cap/button or flat head, depending on model you printed
If using machine screws and nuts, Nylock type nuts are recommended
Screw length will vary with thickness of the panel where you install it
I used 8mm on sheet metal
You can also undersize the drilled hole and tap the panel and eliminate the nut or even use an M3 sheet metal or wood screw
Designed in vanilla AutoCAD 2027.
73 de K4ZX