Compact Super Glue & Activator Wall Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact wall holder for super glue and activator spray, with an oval bottle pocket and hidden countersunk mounting holes
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
Keep your super glue and activator together and within easy reach. This compact holder mounts directly to a workshop wall or cabinet, with no protruding mounting tabs.
Features:
Deep round sleeve for the activator spray.
Oval pocket that follows the glue bottle’s shape.
Two concealed mounting holes for 4 mm countersunk screws.
Drain holes in both pockets.
Dimensions:
Overall: 110 × 66.5 × 49 mm.
Activator sleeve: Ø57 mm inside, 45 mm internal depth.
Glue pocket: 30 × 51 mm oval opening, 30 mm internal depth.
Designed around an activator can measuring Ø53 mm and an oval glue bottle measuring 26 × 47 mm. Check your containers before printing.
Suggested print settings:
Material: PETG.
Layer height: 0.2 mm.
Perimeters: 4.
Infill: 20–25%.
Orientation: upright, with both flat bases on the build plate.
Mounting:
Remove both bottles and fasten the holder through the holes inside the sleeves. An angled bit adapter helps reach the screws. Mount against a flat surface and avoid overtightening.
The model has been checked digitally. Physical fit, printing and load testing have not yet been verified.