Compact Super Glue & Activator Wall Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact wall holder for super glue and activator spray, with an oval bottle pocket and hidden countersunk mounting holes
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
Keep your super glue and activator together and within easy reach. This compact holder mounts directly to a workshop wall or cabinet, with no protruding mounting tabs.
Features:
Deep round sleeve for the activator spray.
Oval pocket that follows the glue bottle’s shape.
Two concealed mounting holes for 4 mm countersunk screws.
Drain holes in both pockets.
Dimensions:
Overall: 110 × 66.5 × 49 mm.
Activator sleeve: Ø57 mm inside, 45 mm internal depth.
Glue pocket: 30 × 51 mm oval opening, 30 mm internal depth.
Designed around an activator can measuring Ø53 mm and an oval glue bottle measuring 26 × 47 mm. Check your containers before printing.
Suggested print settings:
Material: PETG.
Layer height: 0.2 mm.
Perimeters: 4.
Infill: 20–25%.
Orientation: upright, with both flat bases on the build plate.
Mounting:
Remove both bottles and fasten the holder through the holes inside the sleeves. An angled bit adapter helps reach the screws. Mount against a flat surface and avoid overtightening.
The model has been checked digitally. Physical fit, printing and load testing have not yet been verified.