Counting matching models…
This is designed to activator the manual filament cutter and mount the switch for the 3dChameleon. It can also be used to activate the manual cutter using gcode and not use the 3dChameleon. Orca Slicer Setup Click on the printer settings…
This holder is designed for instant adhesive super glue and its activator.
Holds a bottle of super glue and a can of spray activator. I purchased mine from Amazon here: https://www.amazon.com/dp/B07Y6GV4TW, but there are many similar combos/bottle types that should also work with this. Printed in PLA using .4…
This is one of the 5 activators that needed to be activated in order to summon Diablo in the Diablo 2 Video game. I created it for custom Zombicide maps.
This is a simple Multiboard Holder for 2P.10 Super Glue and Activator. I made this a little taller to be able to use 2 snug fit connectors for stability and weight.
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
Hello Everyone I designed the stand for Wurth products suitable for the Cyanoacrylate Glue Activator with a capacity of 150ml 0893 301 20 and for the Klebfix Easy Pen Cyanoacrylate Glue with DOS System 30grams 0893 090 030. In the middle…
Pecka model and Bolt activator holder for pegboard.
I've been working on this for about a week or so. I now have a perfect working prototype after my fourth design iteration! I wanted to design a portafilter holder/base that blends in (almost) seamlessly with the profile of my mignon…
Bed Temp,50, Nozzle Temp,200, Infill,30%, No Support.
I really liked the Super Glue + Activator holder by @tacoh. but my set was too big. I just split model at the attachment, sized it up to fit my can/bottle, then reattached the attachment. all done in OrcaSlicer.
Print in ASA/ABS or another heat resistant plastic because I think it will reach over 60*C (so no PLA) The Ninja Foodi has a design flaw whereby the small plastic tab that activates the safety switch is easy to snap off. This fits over…
I created this 3D printed part to fix an issue with the Cosori Pro 2, where the basket wasn’t triggering the safety switch to turn the unit on. I just made the part a little longer so it puts more pressure on the switch, and now it works…
I couldn't find any custom holder for my Würth Activator so I made one.
I had a dream I was a spy and I used this to save the world. There were mutants and alien machines and this lady with 3
Kept losing bottles of glue so I made this really quick to keep them together and organized. Made to fit three Stick Fast CA glue and two bottles of activator. Category: DIY
Hold your thin, medium, thick and 2P-10 Bottles + a spot for a UHU stick and the small squirt applicator for the 2P-10. Print Settings: Polymaker Polyterra matte PLA is my daily driver for Gridfinity models Standard Gridfinity Print…
A holder for Mitreapel CA Glue and CA Glue Activator Can. I also included the blender file so if you wanted to tweak the design you can as i was happy having the activator upside down with the cap on. otherwise my can does not fit. link…
After buying a Moccamaster KBT I realized sometimes I don't need to brew a full pot and wanted the option to use another carafe, like a large insulated thermos to brew into. The piece fits right in and presses the white button the carafe…
After a great sugestion I combined two models and added som extra holders for small accessories.
Print in one color or add colorchanges to it as you please
Storage for thin, medium and thick glues with accessories as well as an activator bottle.
Holder for 3 glue bottles (30.50mm) and activator spray (53mm)
Tool to deactivate sensors of covers from RICOH printers and multifunctional printers. For technican use only. Two sides for the different sensors. Print with 100% infill. 0.24 is enough
A HSW mount to hold several sizes of CA Glue and a 4oz aerosol can of activator. Created with an actual HSW insert modeled into the rear for a tight accurate fit. Printed in PCTG but PETG will work just as well. Minimal supports needed.
A vertical mount that holds the Scarlett Solo (Gen 3) and Cloudlifter CL-1 Mic Activator together in a vertical orientation. It has mounting holes and a drill guide for marking placement. A plate for the use of nano tape or alike incase…
I created a holder for the Everglue set for the skadis wall. It includes the activator 200ml and three bottles superglue. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
Easy printable superglue and activator stand. 0.2-0.25 mm layer height with PLA works great. You can easily change the parameters in the .3mf file, for different size containers.
This uses the locking version of https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system to attach BSI glue and activator to openGrid. The glue holder is a little big (as can be seen in the picture) because it…
CAP is a transcription factor from e. coli that works to enable alternative nutrition pathways if glucose levels are low. PDB ID 1CGP Instructions Make it with support. I use 70% support flow rate to make it easily removable. Well-tuned…
2x2 Gridfinity bin to store a bottle of CA superglue with activator spray (200ml). Rotated 45 degrees to fit both in 2x2 grid.
A rapsberry pi pico powered platform to light up small figurines. The brightness can be controlled via USB, conversely it can be used standalone with the light pulsating. The code can be found here:…
A little essential to keep those tidy.
A 3D printer fire alarm deactivator key
The Substance - Activator Fluid 2D Keychain This model was a request from a friend of mine who had just watched the movie The Substance. As you can see, I did not have the correct green color to correctly emulate the actual Activator…
Printer: GuigaByteV1 (Moded Ender 3) Material: PLA (HS Sunlu PLA) Mat. Temp: 200ºC Bed Temp: 50ºC Speed: 100mm/s Infil: 10% Layer Height: 0.2mm
Pull pin detonator for a 40max or 40wad. Comes in multiple versions. Easy Printing, logo, picatinny. Recommended to print the firing pin in PETG. Recomend to use metal pull pins. short firing pin paired with a 20mm x 10mm x .8mm is best…
Printed in PETG on A1 Mini 10mm and 5mm holes for screws and screw driver
Description: Keep your super glue and activator together and within easy reach. This compact holder mounts directly to a workshop wall or cabinet, with no protruding mounting tabs. Features: Deep round sleeve for the activator spray. Oval…
This design allows for the creation of a command-controlled deactivator for magnetic E-Theft Tags (hard magnetic protection). The design is useful for use at self-checkout kiosks in retail. It is simple and reliable; unlike traditional…
I was tired of HSS (Horizontal Surface Syndrome - thanks Drew Witt of wittworks ) and everything on every flat surface around my printer. I had already printed a holder for all my printer tools, but this makes for a great holder during…
I created this 3D printed part to fix an issue with the Cosori Pro 2, where the basket wasn’t triggering the safety switch to turn the unit on. I just made the part a little longer so it puts more pressure on the switch, and now it works…
This uses the locking version of https://www.printables.com/model/1559478-openconnect-opengrids-own-connector-system to attach BSI glue and activator to openGrid. The glue holder is a little big (as can be seen in the picture) because it…
Printed in PETG on A1 Mini 10mm and 5mm holes for screws and screw driver
This design allows for the creation of a command-controlled deactivator for magnetic E-Theft Tags (hard magnetic protection). The design is useful for use at self-checkout kiosks in retail. It is simple and reliable; unlike traditional…
