1 / 3
Scarlett Solo Gen 3 and Cloudlifter CL-1 Mic Activator Table Mount — image 1
1 / 3

Scarlett Solo Gen 3 and Cloudlifter CL-1 Mic Activator Table Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vertical mount for a smaller horizontal footprint. Scarlett is friction fitted, the lifter is screwed. 3mf file included

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
192
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution — Noncommercial — Share Alike

A vertical mount that holds the Scarlett Solo (Gen 3) and Cloudlifter CL-1 Mic Activator together in a vertical orientation. 

It has mounting holes and a drill guide for marking placement. A plate for the use of nano tape or alike incase you don't want to mess up the main mount with less permanent mounting. The plate can be screwed to the mount for better structure. The cloudlifter's feet have to be unscrewed for it to slide in. When it's slid in, add the half washers so when the feet are screwed back on they won't be tilted. Replace the feet with the full washers to make it slimmer, but it isn't needed. The Scarlett just slides in, and the rubber feet help keep it frictioned.

  • Screws are M5 countersunk hex bolts or whatever works for you.
  • Heat inserts for the nano tape plate
  • Nano tape or equivalent if not drilling

This is my first model, so it's not parametric, but if you need to change anything like adding holes for it to be horizontal, the fusion 360 file is included (timeline is a mess).

Tags