Moza HGP shifter plate for gear shift cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple plate that you just screw to get a clean gear stick cover like a real car
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
How to install :
1. Unscrew the four screws on top of the shifter that hold the aluminium plate. (IMPORTANT, keep that plate on)
2. Unscrew the shift knob.
3. Install your cover. you may have to cut it because in general it's going to be to long, that's for you to see.
4. Screw in the 3D print on top of the plate and make sure the cover doesn't block the screw holes.
5. Test if the cover is well placed and enjoy !
Let me know if i should do some adjustements.
If you already search for one before this you might have seen a guy selling one for about 30$ on ebay or etsy. I didn't copy him or used his model or stole him or anything. This is a model that i made myself on fusion 360 that i decided to post for free because i saw that no one made that.