1 / 5
CEN RACING F450 suspension parts original replacement and 4 link kit with servo on axle — zdjęcie 1
1 / 5

CEN RACING F450 suspension parts original replacement and 4 link kit with servo on axle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All parts you need to change your panhard suspension to a proper 4 link.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

You can reuse both panhard bars as upper links for the front axle. You will need another 117mm bar for the rear, or depending on what ball joints you use, you will need the 64mm links for the front and 124mm links for the rear. I have used DIN parts which are of much higher quality than the RC car parts you can buy. You can reuse the orignal servo, or you can use an upgraded one. You will need to swap out the ball joint of the steering link with one of the ball joints you can salvage of the panhard bars.

I have also included the original link mounts, in case you need a replacement for you panhard setup. It does not work well for adding a 4 link, since the angles are to shallow which allows a ton of play.

Tagi