1 / 5
CEN RACING F450 suspension parts original replacement and 4 link kit with servo on axle — image 1
1 / 5

CEN RACING F450 suspension parts original replacement and 4 link kit with servo on axle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

All parts you need to change your panhard suspension to a proper 4 link.

Rating
0 / 5
Likes
2
Downloads
4
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE: I have improved the front 4 link and servo holder.

You can reuse both panhard bars as upper links for the front axle. You will need another 117mm bar for the rear, or depending on what ball joints you use, you will need the 64mm links for the front and 124mm links for the rear. I have used DIN parts which are of much higher quality than the RC car parts you can buy. You can reuse the orignal servo, or you can use an upgraded one. You will need to swap out the ball joint of the steering link with one of the ball joints you can salvage of the panhard bars.

I have also included the original link mounts, in case you need a replacement for you panhard setup. It does not work well for adding a 4 link, since the angles are to shallow which allows a ton of play.

Tags