Pemedor Zyklon/Cyclone auf Bosch GAS 18V Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter-Set Pemedor Zyklon (E) auf Bosch GAS 18V-10 L (A) / Pemedor cyclone to Bosch vacuum adapter set
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DE – Pemedor Zyklon auf Bosch GAS 18V-10 L Adapter-Set
Zwei Adapter, mit denen ein Pemedor Zyklon-Vorabscheider an den Bosch GAS 18V-10 L angeschlossen wird. Der Einlass (E) nimmt das abzusaugende Gerät auf, am Auslass (A) sitzt der Bosch-Sauger. So wird der Sauger bei der Absaugung entlastet.
Druckhinweis: Empfohlen wird PETG mit 4 Wänden und 15 % Infill.
ENG – Pemedor Cyclone to Bosch GAS 18V-10 L Adapter Set
Two adapters that connect a Pemedor cyclone pre-separator to the Bosch GAS 18V-10 L. The inlet (E) takes the tool you want to extract from, and the outlet (A) connects to the Bosch vacuum. This takes load off the vacuum during dust extraction.
Print note: PETG with 4 walls and 15% infill is recommended.