1 / 2
Airbus A320 Standby ISIS Knob — zdjęcie 1
1 / 2

Airbus A320 Standby ISIS Knob

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A knob for my Standby ISIS panel, not fully to scale!

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

A knob for my Standby ISIS Panel. Not a scale 1:1 replica, but made to fit and look good on my panel.

Printed with 45% infill and 0.2mm nozzle for better quality.

There are two versions of the knob availible, a "standard" version with regular tolerances and shaft length, and a "tighter fit" version with a much shorter shaft length. This is since the encoder I used on my panel is surface mounted and very compact it might be easier to use the smaller version instead of the regular one to get a nice and flush fit.

Full panel here:

https://www.printables.com/model/1882431-airbus-a320-standby-isis-panel

Tagi