REMAKE of the "Foam Core Rebate Cutter"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this version to fit the glass cooktop scraper blades ftom DM, and m3 screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 1
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I made this version to fit the glass cooktop scraper blades ftom DM, and m3 screws.
The blades because I din't fund any easily obtainable version of the one the original model required.
And I designed it so ,that it uses M3 screws, again, probably easyer to find, and it also gives the tool a longer lifetime.
So, what you need are:
- 3x M3x10 or smaller (min 7mm) screws
- 3x
- And theese "retoo" blades with the rounded sides
(For some reason I couldn't actualy tind a DM link to them, but i bought them there for a long time)
IMPORTANT: the nuts are inserted during the print
Actual rewiew of how it works by an architect is pendind, mut for mee it seems to work fine.