CrowPanel 2.13" E-Paper L-Stand Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimal, two-piece desk stand for the Elecrow CrowPanel ESP32 2.13" e-paper display
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A minimal, two-piece desk stand for the Elecrow CrowPanel ESP32 2.13" e-paper display. The display stands upright in portrait, leaning back 15°, and a 1000 mAh LiPo battery is hidden in the foot behind it.Two pairs of 3×2 mm magnets beside the battery hold the cover shut. There are no screws or clips, and the front and sides are seamless.
The window shows only the e-paper’s active area. The only openings are:
a USB‑C cutout on the right side
a slot for the dial wheel on the top edge
two button holes beside the dial
Printing: PLA on a 0.4 mm nozzle, 0.2 mm layers, 3 walls, 15–20% infill, no supports.
Body: print it standing on its foot.
Cover: print it on its side edge, with a 5 mm brim.
There is two versions of this model. "Original" and "Variation". Original would be suited if you want a crisp minimal look with no fasteners. If your esp32 needs the two buttons or dial interacted with, then use the Variation version. Variation has a recess for the dial to allow for easier functionality, it also has button extenders that you can re-scale to extended out of the case further (scale the buttons on z-axis to make them taller and thus easier to use) Variation requires 2 M2x6 Screws for additional support.
Amazon Links to hardware:
(note: i am not affiliated or sponsored by the manufacturer)
https://a.co/d/05Qio5iW
https://a.co/d/03XU0t2d