Liczymy pasujące modele…
This is a remix of the '7 inch LCD Case' by arrowmeiwaracing, which can be found here. I was looking for a case for my Elecrow 7 inch LCD screen to be used as a touch interface for my Octoprint server, I came across the original by…
(Update 11/25/2019) Added the latest version STL files (that matches with IGES ones). (Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Elecrow 5inch…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
Commercial Use and Attribution Notice: ACOS Design © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale,…
Got the idea from here: https://www.printables.com/model/328757-octoprint-console-raspberry-pi-3-b-5-inch-elcrow-t But wanted to make it for 7 inch screen, and a orange pi 5b Its still a work in progress but on first looks it seem to fit…
This is a case for the ThinkNode M2 Meshtastic board. I found a full STP file on Github. It appears to be the file for their injection molded case. I imported the file into Fusion 360. I then modified some of the parts to make them 3D…
Monitor Case for Elecrow 7" inch touchscreen monitor . Bigger cutouts for HDMI & USB allow better access. Switch that can operate the backlight switch on the board. 4 off M3 x 12 screws used to hold the case together I used Nylon M3 I…
A housing designed for the Elecrow 5 inch RC050S display which is compatible with a Raspberry Pi installed behind, depending on the standoff length used. **M3 STANDOFFS REQUIRED** A standoff length of 25mm is enough clearance for a…
Enclosure for Elecrow CrowPanel ESP32 HMI 5.0-inch Display. The model is similar to a mini PC screen. 0.2mm, no supports
This is a set of accessories to mount the 7 inch LCD screen to a table or desk, such as an Ikea LACK. The mount is attached to the screen case with 4 off M3x16 bolts and nuts. The arm is mounted using 4 off M3x8 bolts and nuts. The arm…
Prints just fine, used the dimensions from: https://www.elecrow.com/7-inch-1024-600-hdmi-lcd-display-with-touch-screen.html Every insert is M3. You might need to drill the holes a bit, depending on the true dimensions of you displays pcb.
A mount for Elecrow 5" touch display for raspberry pi ( https://www.amazon.com/dp/B07FDYXPT7 ) suitable for use with octoprint/octodash or other purposes. This is a remix of my console for the Adafruit 5" touchscreen with mounting points…
This is a case for the Elecrow 5Inch TFT Touch Screen (Resistance Touch) display. This display can be found on amazon (link provided father below). The display is sandwiched together with the PI using GPIO pins (uses 26pins). So far it…
One of the acrylic feet broke on my display so I created replacements that you can print. I made these slightly longer and made the angle of tilt more acute than the originals. This is a 7inch touch screen that is compatible with many…
Note: my MK4 enclosure is still in progress. Waiting for the panels, then it will be upmost finished. Wait for MMU3, then a new adventure is "written on the wall". LOL!! I took Darragh's design for the front and rear part of the case for…
This screen mount is very easy to print and very easy to assemble. It's a total of four parts that are all friction fit together. Depending on your printer's capabilities, you may need to slightly scale parts of the model up or down to…
This is my take on existing stand for the Elecrow CrowPanel 2.1" display. I've rotated the mount holes to make my display vertical but this might just be a manufacturing variance. Happy to provide a vertical aligned mount if that is…
As all of the existing mounts didnt fit for the ELECROW 7'' Display i redesigned my own in Fusion 360. Its a cheap display and works excellent on my ratrig. ELECROW Raspberry Pi Display, 7 Inch Touchscreen Monitor Small Monitor 1024X600…
This design mounts an Elecrow 5 inch LCD Display-B to a 2020 profile extrusion. I created this for my Ender 3, but it should work with any printer that uses the same size extrusions. In addition to the printed parts you will need the…
I CNC machined the screen frame from Iroko hardwood and the backing plate is machined from aluminum plate. Both of these can be 3d printed instead. The mounting plate is bolted to the angle bracket with M6 bolts.
This is a stand for the "7 Inch Touchscreen Case (from Elecrow)" made by NeoRame. In contrast to the holder made by NeoRame, the stand sits flat on the table, not clamped on an IKEA Lack table. If you like this design, please rate it,…
A 2U 10-inch rack mount adapter for the Elecrow 5-inch touchscreen display (SKU: DIS05490T). This display has a standoff for a single Raspberry Pi (Models 2, 3, 4 and 5). You can buy this screen in the following URLs: German Amazon Global…
A while back I wanted to have a screen for my Octoprint server. Decided on the Elecrow DIS05490T but couldn't find a case or mounting solution for this exact model. I fired up Solidworks and decided to make this a project. The case is…
It's not pretty but it gets the job done. I encourage you to buy Elecrow's official case for this device. If you have ended up with the bare board though, this model is better than nothing. Something thrown together to protect my test…
This is a two piece bezel and mount that replicates the screen angle of the OEM and engages the mounting slots on the front of the printer frame. Requires eight 3mm heat inserts and 8 M3x6mm screws. Four inserts in the ends of the…
Unscrew the nut and washer on the SMA connector. put the radio into the case, close the lid and tighten the washer/nut back on. There are two LID variations, 1 with a usr btn whole and one without.
I designed this for my touchscreen since it needed a case, and I wanted to be able to mount it inside my rackmount print enclosure. After connecting it to my OctoPi system and configuring/setting up OctoDash , it worked right away--it's…
Display Mount for Ender 3 S1 (Pro) using the original mount based on a Elecrow RC050 touch display. https://www.elecrow.com/5-inch-hdmi-800-x-480-capacitive-touch-lcd-display-for-raspberry-pi-pc-sony-ps4.html
Taking inspiration from the engineering consoles from the STARFIELD game I've created a case to house an Elecrow 7" touchscreen, with rear mounts for a Raspberry Pi4. The consoles designed to be mounted on STARFIELD inspired brackets that…
This is a simple displayframe for the Elecrow 9" ESP-32 P4 display including a simple stand. Fixture with 4 M3x16mm
Updated, and tested. I've made some adjustments to the hole positions, they now line up correctly. This is a VESA mount enclosure for the 10.1" Elecrow ESP32-P4 Display Panel. I designed it to take M4 heat inserts for the VESA mount, and…
Ive built myself a Customised Voron 2.4 Ive been using Elecrow screens on all my printers and computers now for sometime since i give up on Waveshare ones having had 2 fail and piss poor after sales!!!! this is my screen…
To be able to mount the screen at the side of my V-Core 3, I decided to create a foldable mount, to minimize the place if it is not in use, or no changes are needed while printing. The touchscreen I use is a full encased ELECROW 7-Zoll…
UPDATE: I added the optional vertical stand; the base just slides right into the stand. This docking station is designed specifically for the Elecrow ThinkNode‑M3 Meshtastic / Meshcore node. It provides a stable base that keeps the device…
Could not find any, so I designed my own. BE CAREFULL NOT TO STRIP THE HOLES (especially the top ones)! Because of the HDMI plug there was little space to play with. Mounting holes are for M3 bolts (2.6mm diameter) and 157mm apart. There…
Does what it says on the tin, basically. It probably will fit the M5 but don't quote me on that. Print it right side up with organic supports from the build plate only and it should print okay. You may also have better luck printing it…
According to my scientific measurements, the M2 bushes reach 3 mm into the case. The base plate has a thickness of 4 mm, so 6mm screws will fit. Clip is included in 2 versions, tight and loose.
This is a Voron 2.4 / Trident skirt and bezel that fits the Elecrow / Hoysond 5 Inch 1024×600 IPS touch screen , which - by the way - is a gorgeous screen. Here is a photo of the screen for reference A thicker version to is also provided…
Elecrow 5-inch touchscreen display (SKU: DIS05490T) mount for OpenGrid with OpenConnect connectors. Fusion archive and step file included. Support my work Do you like my work? A like or a comment means a lot and keeps me making more. Post…
This compact picture-frame enclosure is built for the Elecrow 2.13-inch ESP32 e-paper CrowPanel (250 × 122). I designed it for a small Codex usage dashboard, but the enclosure also works for other projects using this exact board. The…
A basic case/housing for the Elecrow 7" Display-D . It currently fits my needs, but I will add another backside without an attached Raspberry Pi 4. Maybe made modular so you can optionally attach the Pi in a separate Housing to it. A…
The Electow ThinkNode M1 is a great radio, but the stock antenna is poor, and flexible replacements put strain on the PCB mounted SMA antenna connector. These are two FreeCAD designs for supports that screw onto the connector both…
Commercial Use and Attribution Notice: ACOS Design © 2025 by Alley Cat and Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale,…
Full video is on my YouTube Channel : https://www.youtube.com/@SmartHomeCircle
This is a case for the ThinkNode M2 Meshtastic board. I found a full STP file on Github. It appears to be the file for their injection molded case. I imported the file into Fusion 360. I then modified some of the parts to make them 3D…
Snap shut case for the Elecrow 7" ESP32-P4 development board + camera. Fits the speakers and a 10,000 man battery.
Got the idea from here: https://www.printables.com/model/328757-octoprint-console-raspberry-pi-3-b-5-inch-elcrow-t But wanted to make it for 7 inch screen, and a orange pi 5b Its still a work in progress but on first looks it seem to fit…
To be able to mount the screen at the side of my V-Core 3, I decided to create a foldable mount, to minimize the place if it is not in use, or no changes are needed while printing. The touchscreen I use is a full encased ELECROW 7-Zoll…
Casing for CrowPanel -ESP32 Display-1.28(R) inch 240*240 Round IPS Display Capacitive Touch SPI Screen
A case that allows holds a battery and add four pushbuttons to an ESP32-S3 3.5' SPI Terminal It is held on to the terminal using 2x M3 threaded screws and the back is held on to the middle with 6x m3 self tapping screws. The battery power…
Created to go with this Model: https://www.printables.com/model/879890-elecrow-5-inch-display-housing-rc050s/comments
Elecrow 1280x800 screen bezel this is quite pacific to what its been created for, I will at somepoint I will open up the inside bezel parameter to fit its own bezel correctly so could be used more widely and post. Ive designed this as…
This case is for the Elecrow 5 Inch display model number DIS05490T. It has a cable guard to protect the connectors and the display frame is a snap fit. The washers are for mounting the bracket to the extrusion but optional. Required…
The Meshtastic Elecrow Crow Panel 2.8 Case in early stages of development.
ELECROW 7 Inch Touchscreen mount for centauri carbon with raspberry pi 5 mounted behind it. bezel needs to be glued to back, i used B7000 Glue screen is mounted upside down so that the usb cables face the usb port where they will enter…
Snap shut case for the Elecrow 7" ESP32-P4 development board + camera. Fits the speakers and a 10,000 man battery.
This is a minimal and clean case for the crowpanel esp32 2.13" display board. It's developed as part of the tinyreader ( https://github.com/SamueleFacenda/tiny-reader ) project. Printed with a creality ender 3s with PLA, I recommend…
4xM4 nuts 4xM4 x10 screws 4xM3 nuts or the ones that were in the package 4xM3 x20 screws 1xM5 x60 screw 1xM4 x40 screw 1 M4 wingnut 1 M5 wingnut pull the nuts in with your screws
This is a ball mount for the Elecrow 5" touch display with this cover: https://www.printables.com/model/85017-elecrow-5inch-hdmi-display-b-case The ball mount is compatible with this mounting system:…
This was part of a client's project. Instead of letting it dangle around on the USB cable, I designed a quick case with 25mm pads for sticky-tape mounting.
