Stand for the 7 Inch Touchscreen Case (from Elecrow)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand for the "7 Inch Touchscreen Case (from Elecrow)" made by NeoRame.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand for the "7 Inch Touchscreen Case (from Elecrow)" made by NeoRame. In contrast to the holder made by NeoRame, the stand sits flat on the table, not clamped on an IKEA Lack table.
If you like this design, please rate it, post a make and give it a like. Thank you!
The touchscreen itself is this one: https://www.amazon.de/dp/B076J8ZWFF
I really can recommend the screen, it has a crystal-clear picture, touch is precise and it not only works on RaspberryPi machines but also on my Intel based Dell Wyse 3040 Thin client running DietPi with KlipperScreen.