PCB Holder 70x50mm for Genmitsu Cubiko CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PCB frame for Genmitsu Cubiko CNC. Holds 70x50mm FR4 boards flat and secure with changable spoilboard.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
Designed for the Genmitsu Cubiko desktop CNC mill
This PCB frame holds a 70 x 50 mm FR4 board flat and in place on the Cubiko bed, which is what keeps milling clean and accurate. It also has a bonus: because the top and bottom frames line up, you can mill double-sided boards with both sides aligned.
Parts
BOTTOM frame (print 1)
TOP frame (print 1). A marking in the left corner shows the orientation for the TOP frame.
Wasteboard (print 1)
Hardware
4 x M5 x 10 mm screws for the BOTTOM frame
4 x M5 x 16 mm screws for the TOP frame
Why the wasteboard is separate
The wasteboard is a sacrificial piece kept separate from the frames. When it wears down, swap in a new one (about 10 minutes to print) and keep using the frames, which stay accurate for much longer. A notch in the left corner makes the wasteboard quick to pull out and replace. It’s also useful for through-hole drilling, where the bit goes through the board.