1 / 4
PCB Holder 70x50mm for Genmitsu Cubiko CNC — image 1
1 / 4

PCB Holder 70x50mm for Genmitsu Cubiko CNC

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

PCB frame for Genmitsu Cubiko CNC. Holds 70x50mm FR4 boards flat and secure with changable spoilboard.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
41
Reviews
0

Updated at source:

Model information

Category
Tools
License
BSD License

Designed for the Genmitsu Cubiko desktop CNC mill

This PCB frame holds a 70 x 50 mm FR4 board flat and in place on the Cubiko bed, which is what keeps milling clean and accurate. It also has a bonus: because the top and bottom frames line up, you can mill double-sided boards with both sides aligned.

Parts

  • BOTTOM frame (print 1)

  • TOP frame (print 1). A marking in the left corner shows the orientation for the TOP frame.

  • Wasteboard (print 1)

Hardware

  • 4 x M5 x 10 mm screws for the BOTTOM frame

  • 4 x M5 x 16 mm screws for the TOP frame

Why the wasteboard is separate

The wasteboard is a sacrificial piece kept separate from the frames. When it wears down, swap in a new one (about 10 minutes to print) and keep using the frames, which stay accurate for much longer. A notch in the left corner makes the wasteboard quick to pull out and replace. It’s also useful for through-hole drilling, where the bit goes through the board.

Tags