1 / 3
Wall Holder for Hairbrush and Combs — zdjęcie 1
1 / 3

Wall Holder for Hairbrush and Combs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A wall holder for a hairbrush, combs and hair ties.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
14
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Standard Digital File License

A wall holder for a hairbrush, combs and hair ties. The brush hangs by its neck in a 22 mm fork while the handle drops into a cup below, which has drain holes in the bottom so water runs out. Three 13 mm slots take combs, small brushes and hair clips. It fits flat and round brush necks from 12 to 20 mm and handles up to about 13 cm long. One part, 140 x 51 x 156 mm, mounted with 2 screws. Print it standing in PETG at 0.2 mm without supports. You need to buy 2 countersunk screws up to 4 mm and plugs.

Parts

  • Uchwyt na szczotke i grzebien bezbajzlu.stl x 1

Print settings

  • Bambu Lab A1, 0.4 nozzle, PETG, 0.20 mm layer

  • No supports needed

  • Full set: 5 h 50 min, 151 g

Tagi