LayersFactory
Zgłoś model
1 / 2
HP EliteDesk mount for EliteDisplay Monitors (E232 / E242) — zdjęcie 1
1 / 2

HP EliteDesk mount for EliteDisplay Monitors (E232 / E242)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

DS Prints

DS Prints

@DSPrints

HP EliteDesk mount for EliteDisplay Monitors (E232 / E242) I believe they share same stand?

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
10
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)Powiązane

This two-part slide-on mounting system allows you to mount an HP EliteDesk Mini PC directly onto the vertical column of an HP EliteDisplay monitor stand without taking up desk space.

simply slide the brackets down over the monitor post from the top.

Features

  • Two-Part Design: Upper and lower brackets work together to securely wrap around the stand's profile and cradle the PC cleanly.

  • Easy Slide-On Assembly: Slides straight onto the vertical stand post.

  • VESA Mounting: Direct attachment using standard VESA bolt placement on the back of the EliteDesk.

  • Tested Compatibility: Designed for the HP EliteDisplay E232 (23"), and should also fit the HP EliteDisplay E242 (24") and other EliteDisplay series monitors sharing the same stand profile.

Installation Instructions

  1. Attach both printed bracket pieces (blue sections) to the VESA holes on the back of your HP EliteDesk using standard VESA screws.

  2. Slide the entire assembly down over the vertical column of your HP EliteDisplay monitor stand until it sits firmly in place.

Hardware Required

  • 4× VESA Screws: Standard M4 screws (typically M4 x 8mm–10mm) to attach the printed brackets to the EliteDesk casing.

Recommended Print Settings

  • Material: PETG or ABS/ASA recommended for warmth resistance and durable rigidity. High-wall PLA can also work well.

  • Wall Loops / Perimeters: 4–5 walls for strong structural hold along the slide channels and screw bosses.

  • Infill: 25%–30% (Gyroid or Grid).

  • Layer Height: 0.20mm.

  • Supports: Print flat on the print bed as oriented from STL

Tagi

displaystandmountpcvesahpe232elitedisplayelitedeske242