HP EliteDesk mount for EliteDisplay Monitors (E232 / E242)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HP EliteDesk mount for EliteDisplay Monitors (E232 / E242) I believe they share same stand?
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This two-part slide-on mounting system allows you to mount an HP EliteDesk Mini PC directly onto the vertical column of an HP EliteDisplay monitor stand without taking up desk space.
simply slide the brackets down over the monitor post from the top.
Features
Two-Part Design: Upper and lower brackets work together to securely wrap around the stand's profile and cradle the PC cleanly.
Easy Slide-On Assembly: Slides straight onto the vertical stand post.
VESA Mounting: Direct attachment using standard VESA bolt placement on the back of the EliteDesk.
Tested Compatibility: Designed for the HP EliteDisplay E232 (23"), and should also fit the HP EliteDisplay E242 (24") and other EliteDisplay series monitors sharing the same stand profile.
Installation Instructions
Attach both printed bracket pieces (blue sections) to the VESA holes on the back of your HP EliteDesk using standard VESA screws.
Slide the entire assembly down over the vertical column of your HP EliteDisplay monitor stand until it sits firmly in place.
Hardware Required
4× VESA Screws: Standard M4 screws (typically M4 x 8mm–10mm) to attach the printed brackets to the EliteDesk casing.
Recommended Print Settings
Material: PETG or ABS/ASA recommended for warmth resistance and durable rigidity. High-wall PLA can also work well.
Wall Loops / Perimeters: 4–5 walls for strong structural hold along the slide channels and screw bosses.
Infill: 25%–30% (Gyroid or Grid).
Layer Height: 0.20mm.
Supports: Print flat on the print bed as oriented from STL