Coralboard Desktop Case with Modular Covers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ventilated Coralboard desktop enclosure with captive buttons, two-colour labels and interchangeable covers.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact desktop enclosure designed around the Coralboard reference model.
The case has a removable top, a flush-bottom tray, front GPIO access, captive reset and user buttons, roof ventilation, clearance for a 30 × 30 × 10 mm fan, and space for a 14 × 14 × 6 mm heatsink.
The expansion side accepts one of two interchangeable covers:
Solid mikroBUS blank
CSI ribbon opening
The two covers are alternatives. Install only the one that matches your build.
It should all be printable without supports, though it hasn't been tested yet. The small button pistons may benefit from a brim on some printers.
The desktop plate contains seven printed parts: six parts for one assembled case, plus the alternative expansion cover. The body volumes use material 1 and the flush lettering inlays use material 2. Assign both materials to the same filament for a single-colour print.
Nominal hardware shown in the renders:
4x | M3 × 16 mm enclosure screws
4x | M3 heat-set inserts
4x | adhesive feet
Board, fan and heatsink
You will also find an assembly guide in the file download section.
Physical printing, assembly fit and thermal performance have not yet been tested.
Check out the 10" 1U rack version too: