1 / 3
Miyota 8N24 spacer ring for SKX007 style case — zdjęcie 1
1 / 3

Miyota 8N24 spacer ring for SKX007 style case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer ring to fit an Miyota 8N24 movement into an SKX007 style case.

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I made this ring to fit a Miyota 8N24 into an SKX007 style case which fits a Seiko NH35. The wider space around the movement with the ring also allows for dial dots to be placed for a skeletonized watch dial ring, as there aren't many nice dials available for the 8N24. My recommendation would be to just buy one for the NH35 and cut the dial feet off and stick dial dots on there and align it as well as possible by lining up the 3 o'clock indice with the stem in the movement.

This spacer might not work for all NH35 cases depending on their design but was largely based on an existing generic Miyota 8215 spacer ring to fit inside of an NH35 case, alongside the schematics provided by Miyota themselves online. Depending on your printer, the tolerances might differ for the rotor to spin smoothly but this can easily be filed or cut slightly to make it spin more freely.
Depending on if you have an exhibition case back, you might barely see the ring on the back but in my case it was barely visible and only in some angles.

Printer: Ender 3 S1 Pro
Material: PLA+
Layer Height: 0.2mm
Nozzle: 0.4mm
Walls: 3 (shouldn't really matter as its thin enough where it should be all walls anyways)
Supports: None
Brim: Outer brim only

Tagi