Wall Cradles for Kayak or SUP Paddle, Pair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of wall cradles that store a kayak or SUP paddle horizontally.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
A pair of wall cradles that store a kayak or SUP paddle horizontally. The paddle shaft lies in a deep 42 mm cradle and a high front lip keeps it from rolling out. It suits shafts from 30 to 40 mm in diameter, including oval shafts up to 40 x 34 mm, and works for double-blade kayak paddles, SUP and inflatable boat paddles, poles or telescopic rods. Each cradle is 40 x 61 x 134 mm with two countersunk screw holes; space them about two thirds of the shaft length apart. Two identical parts, printed on the side with 4 walls and 25% gyroid in PETG at 0.2 mm, no supports. You need to buy 4 countersunk 4-5 mm screws and plugs.
Parts
Wieszak na wioslo bezbajzlu.stl x 2
Print settings
Bambu Lab A1, 0.4 nozzle, PETG, 0.20 mm layer
No supports needed
Full set: 2 h 35 min, 64 g