Interior Glass Mount for WOLFBOX G840S Rear Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cradle that mounts a WOLFBOX G840S (or similar) rear dashcam camera inside the car, taped to the glass.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A trapezoidal cradle that mounts the rear camera of a WOLFBOX G840S dashcam (or a similar rear camera) on the inside of a car or truck, against the glass, instead of on the outside. It has a front cutout for the lens, a support floor, triangular side gussets, and wide adhesive wings plus a lower extension for VHB double-sided tape.
Fits a 40 mm (front) / 50 mm (back) × 35 mm deep × 32 mm tall camera
Overall 102 × 35 × 55 mm, 3 mm walls
Customize it in your browser
This model is fully parametric. Change the camera dimensions, wall thickness and tape wing sizes to fit another camera. Open it in the free OpenSCAD Playground, change the numbers and export your own STL: Open it in OpenSCAD Playground
Source
The OpenSCAD source and the rest of my models are on GitHub: github.com/SinaChavoshi/3d_printer_agentic_models
Designed with AI assistance in OpenSCAD.