Pen Holder for Skådis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Pen Holder for mounting on IKEA Skådis pegboard with T-nuts.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Skadis Pen Holder
A modular pen holder designed for the Skadis pegboard. It consists of a main mounting body and a cuple of interchangeable inserts, each designed to hold multiple pens and keep them neatly organized and easily accessible.
The holder mounts directly to the Skadis pegboard using T-nuts and screws, providing a secure and stable attachment.
Installation
The pen holder attaches to the Skådis pegboard using T-nuts for M3 screws. This mounting method provides a secure fit while allowing for easy installation and removal with a screwdriver. For the best fit, use screws approximately 12 mm long.
Place the screw in the T-nut through the holes in the pen holder and screw it in until the T-nut is about 2-3 mm from the back of the pen holder, insert the T-nuts vertically through the Skadis holes, then as you tighten the screw the T-nut will turn and lock the pen holder to the board.
You can find and download the matching T-nut here: Skadis T-nut for M3 screw.
Printing and print settings
The best way to print the pen holder is flat on the top. In the model files the parts are oriented in the best direction for printing. Use PLA for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm or less. A wall thickness of at least 3 lines and an infill of 25%. There is no need for a support structure. When printing the pen holder's body, I recommend using a brim to improve adhesion, since the contact area is small.
More of my models
You might be interested in some of my other models. Here you can find more of my models for IKEA Skådis board.