CoralBoard SL Enclosure plus 8020 and DIN Rail Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for the Synaptics CoralBoard SL with multiple mounting options.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
CoralBoard SL Enclosure – Modular Mounting System
A compact, 3D-printable enclosure for the Synaptics CoralBoard SL for home, laboratory or industrial use.
The enclosure features a removable dovetail mounting system, allowing the CoralBoard SL to be installed on aluminum T-slot extrusion or DIN rail interchangeably.
The initial release includes both a 1010 aluminum extrusion (8020) and DIN-rail mount, with VESA mounting adapter planned (pending interest).
Features
Modular dovetail mounting: Quickly install or remove the enclosure from its mounting plate.
1010 T-slot compatibility: Provides mounting to aluminum extrusion commonly used in instrumentation frames, automation equipment, and test fixtures (8020 100 Series).
35mm DIN Rail compatibility: Provides mounting to top-hat DIN rail, commonly used in instrumentation frames, automation equipment, and test fixtures.
Compact two-piece enclosure: Separate main body and ventilated cover. Additional covers planned for alternate configurations/connectivity requirements.
Accessible connections: Openings for the board's external interfaces, reset, and user controls.
Ventilated cover: Honeycomb openings provide passive airflow.
The modular mounting arrangement allows the enclosure to be transferred between compatible mounting locations without disassembling the enclosure.
Required Hardware and Materials
4 × M3 × 6 mm or #4 x 1/2 Imperial countersunk screws for the enclosure cover
2 × 1/4-20 button-head screws for the 1010 extrusion mount
Medium-viscosity cyanoacrylate (CA) adhesive or acrylic cement (to adhere mount adapter)
Assembly
Print the enclosure components and remove any supports.
Align the dovetail adapter with the locating bosses on the rear of the enclosure.
Bond the dovetail adapter to the enclosure using a suitable amount of medium CA adhesive. Allow the adhesive to cure according to its instructions.
Install the CoralBoard SL into the main enclosure body.
Install the cover using four M3 × 6 mm or #4 × 1/2" countersunk screws.
Printing Recommendations
PETG is recommend and tested well with the flexible switch buttons.