140 modeli
Bug Catcher 101010 Designed to catch flying insects, notably firefly's! Let’s get our kids outside and have some fun! Please only use for catch and release. ;-) The domes print upside down with no supports. The scissors print in place,…
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
Sketched to 0.1mm accuracy based off a bunch of measurements. Maybe useful!
EcoTech Radion xr30 1010 Aluminum Extrusion Light Mount
Corner brackets and plates to be used with 1010 extrusions. Compatible with 1010 extrusions such as the ones from https://8020.net/ and https://www.tnutz.com/ Hardware required to mount to extrusions: ¼-20 x ½" BHSC Source:…
Replacement for the original clip that can be lost or broken. Expensive (costs around USD1 per piece) and frequent not in stock. Can be damaged when removing during front brake maintenance. Takes 7 minutes to print one part. Use 100%…
Nothing much to say. Got a used Festool OF 1010 Router and a running OsVac System in my Workshop. Here is my quick and dirty Adapter. Printed it with ABS, but i guess PLA is better as u see the “non flexible” Bending Areas on the Fotos.…
Put your soldering iron stand on top of the Weller WE1010 main unit to save some desk space. Hooks under the edge above the display, to maintain balance. Mounted using the rubber feet through the printed part into the soldering iron…
This organizer frame is designed to secure the Flipper zero wifi module inside a Peli 1010 case. The Flipper zero wifi board should also have a case like these ones to work with this model.…
I couldn't find any 3D files for plates fitting the 10mm extrusion MakerBeam brands as their 'Regular' series, so I modeled them up. All plates are 1.5mm thick and the through holes are 3mm ID per the spec. Included is the flat plate, the…
V1 is very tight fitting, which is good or bad depending on your materials and goals. V2 is too loose, V3 was perfect for my materials. Play with scaling by a few percent may also help depending on calibration, etc. All of these pieces…
I needed a quick offset t-nut for the Ender 2 Pro. It uses an M3 nut.
My version of a T-nut for 1010 aluminum extrusion. Uses a standard M5 nut and screw.
AFA Tooling Deburring Tool from Amazon Remix Notes: -Blade hole diameter increased slightly to 3.5mm. -Removed extra patterned blade holes which created a gouge inside the larger hole barrel for deburring tool.
I needed the norm finger according to IEC 61010 specifications for pre compliance testing. Print the handle and the finger separately and glue them together. Make sure the finger is seated all the way. The final length should be 80mm. For…
Insert for Pelican 1010 case to better hold my IEM's and Bluetooth adapters. The Fusion file is included if you want to re-arrange the internals to better fit your needs. I printed with TPU to give some flex to the insert and also…
I was looking for a way to move/store my Weller WE1010 soldering station, without moving the 2 parts individually. So I created this simple solution. Print with 4 walls and 42% infill minimally, as the left part is quite heavy.
This model is compatible with the lego system.
I found the vacuum connection too close to the surface, and not efficiency enough. There was an way to get all the dust more efficient Print instructions Printed in 0.2 mm layer in PETG, no supports needed
I missed some more types of brackets in my Makerbeam® set, so decided to make some more. These are the flat (plates), to keep them separate from the actual 3D brackets . Included is a FreeCAD file with customizable beam size, hole size,…
All of these pieces were printed with TPU 95A, 0.28 layers, 25% grid infill, 2.5 mm3 flow, 240C nozzle, and 140F dryer. TPU can stand the torque of firm twisting into place, but the flimsier pieces (eg, slotted guides), need more work and…
The SDrive-MAX is an amazing device for your Atari 8-Bit; think of it as an unencumbered, open source, enhanced version of your SIO2SD. For all its awesomeness I felt the available case designs were letting it down a lot. I’ve been…
My son lost his launch lug when building his latest rocket and asked me to print him another one. Since he wants to launch with high-power power rockets, he needs to launch off the rail (club guidelines) but he didn't want both, so I…
A router table insert module, originally made for my homemade router table. The module fits on the base plate of a Festool OF 1010 router and consists of two modules: the main module, attached with two screws to the base of the router…
I needed brackets to mount a t-slot extrusion rail to the underside of my desk while leaving at least one slot unobstructed - but why buy expensive hardware and t-nuts when I can instead over-engineer a solution instead? I've included an…
Ce modèle est complété par celui-ci qui est paramétrique donc plus facile à modifier. https://www.printables.com/model/1122656-bague-a-copier-parametrique-pour-festool-qf1010-pa Pour modifier le diamètre utilisez le fichier freecad et…
I'm trying to clear as much desk space as possible, so I made this shelf to get my Weller WE1010 out of the way, but still being close enough to use it without moving it. It uses the Multiboard 6x6 Push-Fit Bracket upside down, with small…
A router sled is a woodworking tool for flattening very large pieces of wood. 8020 is extruded aluminum that can be ordered to size. I used it because it's what I had on hand. Here's a video of the sled in action:…
8020 1010 1"x1" curtain or bungee sliding attachment point
Here's a stand I made for the 1010music blackbox and desktop sampler workstation and the bluebox mixer/recorder. It lifts it up, tilts it forward and adds room underneath for a power bank battery. Note, I added a small cutout in the front…
This is an insert for the Weller PH 70 Safety Rest that holds a Weller Soldering Brass Sponge cleaning pad. Easily transform your Wet Sponge-style cleaning pad into a Brass Sponge-style cleaning pad. Model is available in two versions:…
A mount for an Arduino Uno and a proto board to attach to an 8020 Series 10 beam. If you are careful, you can run some of the cables under the mount in the 8020 channel. Print instructions Category: Electronics Summary A mount for an…
Ich war von meinem alten Anschlag leid, deshalb habe ich in den originalen Anschlag von Festool ein M5 Gewinde geschnitten und Langlöcher in den Anschlag vorgesehen. Bitte siehe Bilder I was tired of my old fence, so I cut a M5 thread in…
This is a wire duct/guide that clips into a 1-inch, 25mm, 20mm base t-slot rail. It also fits the rails on my FLSUN SR printer, which are specific to that printer but based on the 2020 profile. Use it with many copies in series to make a…
After making some plates , I still missed some kinds of brackets in my Makerbeam® set. Included is a FreeCAD file with customizable beam size, hole size, fillet. STLs generated with: target: 1010 aluminum extrusion, M3 screw holes unit…
These are designed for larger model rockets (≥ 3-in body tube) to fit on a 1010 aluminum extrusion ("rail") with just enough wiggle room to prevent binding but will slide nicely and keep the pointy end going up. They have 6mm holes so a…
Needed Equipment 1010 Pelican case M2x6 hex screws x2 1/16 Drill bit 15/64 Drill bit SMA Female to SMA Male right angle 6" antenna extension cable https://www.amazon.com/dp/B00COJWKGC?psc=1&ref=ppx_yo2ov_dt_b_product_details
Copy rings for the milling cutter I tried to adjust the dimensions of the model to the shrinkage of the PETG material For example, a ring with a diameter of 39.94 has a model size of 40.1. They fit tightly into the milling cutter support…
Allows mounting of a 3/16 panel to 8020. Needs a ¼-20 1" Cap Head Screw, and uses standard 8020 tnut, drop in, or low cost.
Kessil AP9X Extruded Aluminum 1010 Mount
Built to match the form factor of the soldering iron holding base for a complete look. Material, fill percent, and layer height are flexible. The copy shown was printed in PETG with 0.35-mm layer height and 50% fill. The holes as printed…
This is a remix from cheer4ftc's design. It works well, but I wanted to mount it on a 1" square extrusion (8020's 1010 size). I've also included the SolidWorks model I generated for this remix. Enjoy!
ReeFi Uno 2.0 Extruded Aluminum 1010 Mount
Pronounced "Ten Ten," this succulent pot design came from experiments in OPENSCAD in April 2022. Example printed on our Prusa MINI+ using Prusament PETG Terracotta Light. Watch a fun time-lapse on our YouTube channel here:
Amélioration du modèle précédent (https://www.printables.com/model/465020-bague-a-copier-pour-defonceuse-festool-qf1010) par ajout d'une feuille de tableur dans le fichier Freecad.Le modèle a été complétement redessiné. pour permettre de…
Adapter to integrate Weller silicone holder for brass sponge into PH 70 safety rest for soldering iron.
One-piece cover to protect your 1010Music Nanobox Lemondrop synth . Or indeed your Fireball… but if you use it for that, sorry for the Lemondrop word embossed into it. It clips over the top and is held in place by little clip shapes at…
Amiga 1010 External 3.5 disk Drive, Gotek.
TB10104 is a storage box designed for the Tessera modular storage system. Assembly requires no screws — glue is only needed to attach the optional label plate. External dimensions: 100x100x40mm Quick overview of the Tessera System:…
Cover for the 1010music desktop sampler. Kind of like a deck saver, I use it so the screen, knobs, and buttons are safe from other objects in my foam zipper travel case. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts:…
Vous avez dû être confronté un jour ou l'autre au défonçage sur chant. Cas typique : encastrer une serrure de porte. Une transposition du modèle original en impression 3D, avec des joues coulissantes.
This is a jig for positioning of holes for Anchor Fasteners in 1 inch extruded aluminum t-slot, commonly called 8020. The borehole should use a 9/16th End Mill or high quality Forstner bit.
I loved the design from @fotomas_336415 , but my situation required some extra clearance in the back, so I moved the platform forward 20 mm. Original description: Put your soldering iron stand on top of the Weller WE1010 main unit to save…
This is based on and matched my Amiga 1000 model.
A insert for the Peli Case 1010 to perfectly fit a Leatherman Wave+ and the Bit Kit. Printed in TPU, with 0.4mm nozzle, for a snug fit, especially on the bitholders. Its also for noise reduction, to minimize ratteling. Printing with…
Latch of a friends cuckoo CHXB1010FS ricecooker broke off. Due to the covid-19 situation at the time they could not provide replacement parts. We created this replacement latch. There is one file for the complete latch and two for a…
More large robot prints are comming up :) …. This one is based on an image and comic series I discovered on Deviant Art. The original 3D model was designed by an artist on Fiverr for me. The robot design is from the artist “ ProdigyDuck ”…
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 30 mm from the rail, the second one another 26 mm for the next milling. Two-color version
A 3x1x6 Units Gridfinity Base for Noga SP1010 Deburring Set Holes are already with offset. If your printer tolerances are out of way and the pins don't fit, a 3.5mm (ideally 3.4mm) drill bit should do the job.
This adapter connects a Festool 36 mm dust extraction hose to the oval dust port on the Festool OF 1010 router . Unlike a straight adapter, this version is slightly angled to lift the hose upward and away from the workpiece. This helps…
This allows the reuse of an old Amiga A1010 external floppy drive by inserting a Gotek PCB. The fascia accepts a rotary encoder, 0.91" OLED display (hot glued in place), and relocation of the activity and 'power on' LEDs (3mm), also hot…
Allows storage of TTS style mill tools (20mm shaft) on 1010 size 8020 profile.
Reducer for dust extraction for Extol ESB1010. This end cap ensures the removal of dust particles from the machine. It reduces the outlet from the machine base to a 30mm hole for a flexible hose that is connected to the extraction (e.g.…
I designed it as a joke for my family, I have this printer and everybody ask me to print everything since the toner is cheap, but nobody gives me money to buy ink or paper. Print the lateral panels with white or gray, the middle body with…
Trying to make a vert GPU mount for 1010 makerbeam, still a work in progress and any ideas to make it better are welcomed. 18 June 23 Made some changes to the mount making the mount stronger.
This attachment for the Festool OF 1010 EBQ-Plus router helps keep the router aligned, when deepening an existing track, eg. the one in the wooden deck on a sailboat, where rubber is normally applied. When refurbishing a deck, you might…
This is a weller 1010 soldering iron tip holder. It is suitable for all weller ET series tips. It can contain 10 tips. May be it is adapt to other type or brand of tips.
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
Connects an OF1010 router to a festool vacuum. I printed using a brim due to the chamfer on the bottom, not sure if it is needed though.
It's been noted recently that the Systainer insert that comes with the Festool OF 1010 router doesn't contain a spot for the spare collet. I designed this piece so that you drill a 1/2" hole in an open spot in the raised portion of the…
This is a vacuum hose adapter mount for the Gamma BS-1010 Belt Sander (Bandschhurmachine). It is designed to slide over the extraction port of the tool just like the original (vacuum bag piece). I have only printed this on the Bambulabs…
A set of adapters to attach threadboards to 1010 aluminum extrusions, and to attach the 1010 extrusions to walls. Recommended print settings: PETG or PLA 3+ perimeters .4mm+ nozzle size .3mm layer height 20% gyroid infill Fasteners used:…
It's a box for cutter/ scalpel blades. It can contain 6 blades. IMPORTANT , files : the cover1 can contain 4 straight blades and 2 normal blades. BUT you can put straight blades in normal blades hole it will be just less stable. Straight…
Fix all the problems with fitting those tires
Small, quick-to-draw but functional button. I put 3 walls.
Press-fit mounting plates/spacers for capacitive touch sensors. There are versions of the model for the Adafruit AT42QT1010 and (I think) this generic one: These can mount to a surface with (about) M3 bolts (or the American equivalent).…
By default this type of switch doesn't come with either a rack or a wall mount, but i wanted to mount it on a wall vertically. You need an M3 screw, at least 10mm long. I guess it should work with other switches from the same…
A work in progress to aid in using an AMD MI100 on a Geekworm X1010 for a Raspberry Pi 5. This should accommodate other dual-slot gpus for installation onto the X1010. https://www.raspberrypi.com/products/raspberry-pi-5/…
NackHabitat #0063 - WALI Studio Monitor Wall Mount Bracket Adapters 1010 Extrusion Part A - Right Bracket Part B - Left Bracket STEP File - Both brackets & 1010 Extrusion (1") These adapters are meant to be used with these WALI wall mount…
This is extension for SPPH410100 (ON-OFF DPDT button) Print Settings Printer Brand: Two Trees Printer: Two Trees Bluer Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 40 Filament: Colorfil PLA Black Post-Printing =============…
Festool FS guide rail adapter for the latest OF1010, the example has text on top but the data for download has no text. The adapter has a tight fit on de rail, you can make it a little smoother by using sandpaper in the slots. I have used…
A “fly away” or split 1010 rail guide for use with my Dual Egg and Single Egg capsule for model rocketry. Use of a rail is helpful to getter straighter flights and maximum altitude 2-piece print. Slide it over the 24 mm booster airframe…
Vandisphoto's design on thingiverse works fine as it is, but I wanted some markings for easier measurement, + the little "L" sticking up on the top just irritated me. Hardware needed: 2x 8mm rods (the ones that come with the router, or…
NackHabitat #0064 0064_pA_v4_MacBook Air Caddy (1.22.25) 0064_pB_v4_MacBook Air Dovetail Mount (1.22.25) To see a video explanation of this part and it's design, watch the video timestamped @ 11:57: https://youtu.be/zu2WFqhjjEw?t=717…
Lötzinn Abroller Weller WE1010 für Rollen mit min. 10mm Innendurchmesser Des weiteren wird benötigt: 1x Kugellager 608 Z z.B. https://amzn.eu/d/4DOp6TS 2x M4 Gewinde-Einschmelzhülse (M4x6x6) z.B.: https://amzn.eu/d/bWqURZo 2x M4x10…
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
Eurorack panel for your 1010 Music NanoBox
I printed it in 0.2mm PETG with 2mm brim to improve the poor adhesion
Modified from the original design. Wider clip and printability tweaks. You may need to give it a nudge with a pair of pliers to fully seat it. Durability untested. The button still presses against two clips as per the original design. An…
KA ProLine switch mount for Alpine SPPH410100 microswitch
KTM Lichthalter für Scheinwerfer Teilenummer // Part No. 58414010100 Einbaurichtung Pfeil nach oben // Assembly Arrow upwards
I'm a couple of weeks into my Weller WE1010 soldering iron. I’m very happy with it, but it shares the same problem as its predecessor: it’s great when it’s sat on the bench, but it’s not all that easy to move around. My workshop has to be…
Simple wall mount for a Fern HTM1010 hedge trimmer. Updated to v2.0: rounded edges, tighter fit.
Bei mir sind die Lötspitzen immer verloren gegangen. Der Originalhalter war zu stramm was die Lötspitzen zu sehr fixiert hat. Da es sich nicht mit globaler Skalierung heilen ließ, habe ich die Bohrungen entsprechend angepasst und das…
These are designed for larger model rockets (≥ 3-in body tube) to fit on a 1010 aluminum extrusion ("rail") with just enough wiggle room to prevent binding but will slide nicely and keep the pointy end going up. They have 6mm holes so a…
Small, quick-to-draw but functional button. I put 3 walls.
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
Vandisphoto's design on thingiverse works fine as it is, but I wanted some markings for easier measurement, + the little "L" sticking up on the top just irritated me. Hardware needed: 2x 8mm rods (the ones that come with the router, or…
My son lost his launch lug when building his latest rocket and asked me to print him another one. Since he wants to launch with high-power power rockets, he needs to launch off the rail (club guidelines) but he didn't want both, so I…
Nachbau der original Festool Fräshilfe OF FH. Basisplatte und Rändelschrauben für M5 Seckskant zum drucken. Die beiden Führungsbacken habe ich aus MDF gemacht und nicht gedruckt. (Weicheres Material spart außerdem jede Menge Druckzeit :-)…
