Nicoll Turboflow 90 Shower Drain Cap / Bonde de Douche (DTB90 / 0411389) - 100% Tested
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Precision 1:1 tested replacement cap for Nicoll Turboflow 90 shower drain (DTB90/0411389). Print in PETG.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
### 🇬🇧 English Description
100% Accurate & Tested Replacement Cap for Nicoll Turboflow 90 Shower Drain.

The original chrome-plated plastic cap (OEM code DTB90 / 0411389) frequently breaks at the retaining clips during cleaning or accidental stepping. Buying an official replacement often costs between 15€ and 30€, or requires purchasing the complete siphon waste assembly.
This model is a precision reverse-engineered replica modeled in Autodesk Fusion 360, verified with digital calipers and real-world tested in the shower. It preserves the exact vortex water flow ("Turboflow") while offering reinforced legs and smooth hydrodynamic bevels.
#### Specifications & Fit:
* Outer Dome Diameter: 112 mm
* Legs Outer Retention Diameter: 42 mm (with 25 mm central clearance)
* Perimeter Resting Lip: 4.9 mm with filleted edges
* Vortex Fins: 4 tall locking legs + 4 low stabilization fins at 45° with 63.43° discharge slope.
#### Recommended Print Settings:
* Filament: PETG, ASA or ABS (*Do NOT use standard PLA: warm shower water at 45°C+ and bathroom cleaning agents will deform it over time!*).
* Layer Height: 0.20 mm (or 0.16 mm for smoother dome surface).
* Walls / Perimeters: 4 to 5 walls (crucial for structural rigidity of the legs when stepped on).
* Infill: 25% - 30% (Gyroid or Grid).
* Supports: Tree / Organic supports enabled under the fin overhangs.
---
### 🇫🇷 Description Française
Bouchon / Dôme de rechange 100% testé et approuvé pour bonde de douche Nicoll Turboflow 90 (et Turboflow 2).
La pièce d'origine en ABS chromé (référence fabricant DTB90 / 0411389) casse très souvent au niveau des pattes de fixation lors du nettoyage des cheveux ou sous le poids du pied. La pièce détachée officielle coûte entre 15 € et 30 € chez les distributeurs sanitaires.
Ce modèle a été fidèlement rétro-conçu au pied à coulisse sur Fusion 360 et validé en situation réelle dans la douche. Il conserve l'écoulement tourbillonnaire à haut débit d'origine tout en renforçant les pattes de fixation.
#### Dimensions vérifiées :
* Diamètre du dôme : 112 mm
* Empattement extérieur des pieds : 42 mm (passage central de 25 mm)
* Portée d'appui périphérique : 4,9 mm avec congés adoucis
* Ailettes : 4 pieds hauts + 4 ailettes de stabilisation à 45° avec angle d'écoulement de 63,43°.
#### Paramètres d'impression recommandés :
* Matériau : PETG, ASA ou ABS (*Évitez le PLA standard qui se déforme avec l'eau chaude à 45°C et les produits anticalcaires*).
* Hauteur de couche : 0.20 mm (ou 0.16 mm).
* Périmètres / Murs : 4 ou 5 lignes de paroi pour une solidité maximale.
* Remplissage : 25% - 30% (Gyroid).
* Supports : Supports arborescents (Tree supports) sous les ailettes.
---
### 🇮🇹 Descrizione Italiana
Ricambio 100% testato e funzionante per calotta copripiletta doccia Nicoll Turboflow 90 (e Turboflow 2).
Il copripiletta originale (codice ricambio DTB90 / 0411389) tende a spezzarsi sui piedini a scatto durante la rimozione periodica per la pulizia o calpestandolo. Il ricambio originale costa tra i 15 e i 25 € e spesso costringe ad acquistare l'intera piletta a 35-45 €.
Questo modello è stato replicato al calibro centesimale in Autodesk Fusion 360 e testato direttamente nel piatto doccia con acqua corrente. Garantisce la corretta portata d'acqua a vortice ("Turboflow") e offre una struttura rinforzata su tutte le 8 alette.
#### Impostazioni di stampa consigliate:
* Materiale: PETG, ASA o ABS (*Evitare assolutamente il PLA: con l'acqua calda e i detergenti anticalcare si deformerebbe in breve tempo*).
* Altezza layer: 0.20 mm.
* Perimetri: 4 o 5 pareti (indispensabile per rendere le alette quasi piene e resistenti al calpestio).
* Riempimento: 25% - 30% (Gyroid).
* Supporti: Supporti ad albero (Tree supports) sotto gli sbalzi delle alette.
