1 / 7
Raspberry Pi 5 + NVMe + 40x40mm Fan Case — zdjęcie 1
1 / 7

Raspberry Pi 5 + NVMe + 40x40mm Fan Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosure for a Raspberry Pi 5 with Waveshare PCIe To M.2 Adapter Board (D), 2280 NVMe and 40x40x10mm fan.

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

Print the case with the fan side down on the printbed and the lid with the outer side down. No supports necessary.

  • This is a slide in design where the pi + hat is inserted from the side and held exactly in place.

  • I designed the lid to be attached with M2 threaded inserts and screws.

  • The Pi's Ethernet/USB ports are not covered on purpuse to allow best possible airflow.

  • This most probably has to be modified to hold a bare Raspberry Pi without the NVMe hat in place. 

Tagi