1 / 7
Raspberry Pi 5 + NVMe + 40x40mm Fan Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Enclosure for a Raspberry Pi 5 with Waveshare PCIe To M.2 Adapter Board (D), 2280 NVMe and 40x40x10mm fan.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Print the case with the fan side down on the printbed and the lid with the outer side down. No supports necessary.
This is a slide in design where the pi + hat is inserted from the side and held exactly in place.
I designed the lid to be attached with M2 threaded inserts and screws.
The Pi's Ethernet/USB ports are not covered on purpuse to allow best possible airflow.
This most probably has to be modified to hold a bare Raspberry Pi without the NVMe hat in place.