1 / 4
Clamp-On Lamp Table / Shelf (any 19.4mm Ø Pole) — zdjęcie 1
1 / 4

Clamp-On Lamp Table / Shelf (any 19.4mm Ø Pole)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy-duty clamp-on tray for the IKEA SKURUP floor lamp (or any 19.4mm Ø pole) Tested up to 10kg.

Ocena
0 / 5
Polubienia
4
Pobrania
2
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Apache License 2.0

Turn your floor lamp into a functional, space-saving side table. Originally designed for the IKEA SKURUP floor lamp, this clamp-on shelf securely mounts to any standard 19.4mm Ø pole.

It provides an ideal perch for your TV remote, coffee mug, phone, or glasses right next to the couch or reading chair without requiring extra floor space. The clamp and platform have been structurally reinforced for maximum strength, effortlessly supporting up to 10kg (two 5.0kg dumbbells) without sagging or slipping down the pole.


Features & Highlights
  • Tailored Fit: Perfectly sized for any 19.4mm Ø cylindrical rod or tube (specifically designed for IKEA SKURUP).

  • Heavy-Duty Capacity: Tested under significant load (10kg / 22lbs) with zero layer separation or sliding.

  • Space-Saving: Adds practical surface area in tight living room setups or beside the sofa.

  • Integrated Rim: Features a raised edge along the perimeter to prevent pens, remotes, or items from rolling off.

  • Dimensions: 250mm x 192mm x 124,2mm (length x width x height)

  • Adjustable: 3D-printed screw to fix the shelf in place.


Recommended Print Settings
  • Material: I printed mine with simple PLA - the structural integrity is achieved by adjusting the wall count and defining a proper infill value. Any other more robust plastic, such as PETG, ABS, or ASA will do perfectly fine as well!

  • Walls: adjust the print to 6 walls, this is what gives the table the optimal strength.

  • Infill: I used cubic subdivision to optimize plastic usage, with density of 20%.

  • Layer height: 0.2mm will work. Smaller heights may give slightly better quality & strength.

  • Supports: highly recommended because of the fillets around the table, unless your printer is a master of printing overhangs

3D Printed Screw
  • Infill: Use 100% infill (rest of settings the same) as otherwise it may break while screwing it

  • Walls: 6 walls, as in the table model

  • Tolerance (adjust as needed): the screw is designed with 0.2mmtolerance, which should be enough for most 3D printers. Redimension as needed.


Hardware & Assembly

The model requires just the following materials:

  • M4.5x55mm countersunk screws (such as this one) - 8 of them

To assembly:

  1. Position the back part at the lamp pole.

  2. Put the front part next to the back, start screwing from top to bottom. HIGHLY RECOMMENDED: screw and unscrew the bolts first to make it easier afterwards, as the tolerance is minimum. If printing with PLA, do not over-screw!

  3. Place the fix-in-place screw and adjust the height of the table with respect to the lamp.

Enjoy!

Tagi